Distributions¶
PyTorch Distributions¶
Most distributions in Pyro are thin wrappers around PyTorch distributions.
For details on the PyTorch distribution interface, see
torch.distributions.distribution.Distribution
.
For differences between the Pyro and PyTorch interfaces, see
TorchDistributionMixin
.
Bernoulli¶
- class Bernoulli(probs=None, logits=None, validate_args=None)¶
Wraps
torch.distributions.bernoulli.Bernoulli
withTorchDistributionMixin
.Creates a Bernoulli distribution parameterized by
probs
orlogits
(but not both).Samples are binary (0 or 1). They take the value 1 with probability p and 0 with probability 1 - p.
Example:
>>> m = Bernoulli(torch.tensor([0.3])) >>> m.sample() # 30% chance 1; 70% chance 0 tensor([ 0.])
- Parameters
probs (Number, Tensor) – the probability of sampling 1
logits (Number, Tensor) – the log-odds of sampling 1
Beta¶
- class Beta(concentration1, concentration0, validate_args=None)[source]¶
Wraps
torch.distributions.beta.Beta
withTorchDistributionMixin
.Beta distribution parameterized by
concentration1
andconcentration0
.Example:
>>> m = Beta(torch.tensor([0.5]), torch.tensor([0.5])) >>> m.sample() # Beta distributed with concentration concentration1 and concentration0 tensor([ 0.1046])
Binomial¶
- class Binomial(total_count=1, probs=None, logits=None, validate_args=None)[source]¶
Wraps
torch.distributions.binomial.Binomial
withTorchDistributionMixin
.Creates a Binomial distribution parameterized by
total_count
and eitherprobs
orlogits
(but not both).total_count
must be broadcastable withprobs
/logits
.Example:
>>> m = Binomial(100, torch.tensor([0 , .2, .8, 1])) >>> x = m.sample() tensor([ 0., 22., 71., 100.]) >>> m = Binomial(torch.tensor([[5.], [10.]]), torch.tensor([0.5, 0.8])) >>> x = m.sample() tensor([[ 4., 5.], [ 7., 6.]])
- Parameters
total_count (int or Tensor) – number of Bernoulli trials
probs (Tensor) – Event probabilities
logits (Tensor) – Event log-odds
Categorical¶
- class Categorical(probs=None, logits=None, validate_args=None)[source]¶
Wraps
torch.distributions.categorical.Categorical
withTorchDistributionMixin
.Creates a categorical distribution parameterized by either
probs
orlogits
(but not both).Note
It is equivalent to the distribution that
torch.multinomial()
samples from.Samples are integers from \(\{0, \ldots, K-1\}\) where K is
probs.size(-1)
.If probs is 1-dimensional with length-K, each element is the relative probability of sampling the class at that index.
If probs is N-dimensional, the first N-1 dimensions are treated as a batch of relative probability vectors.
Note
The probs argument must be non-negative, finite and have a non-zero sum, and it will be normalized to sum to 1 along the last dimension.
probs
will return this normalized value. The logits argument will be interpreted as unnormalized log probabilities and can therefore be any real number. It will likewise be normalized so that the resulting probabilities sum to 1 along the last dimension.logits
will return this normalized value.See also:
torch.multinomial()
Example:
>>> m = Categorical(torch.tensor([ 0.25, 0.25, 0.25, 0.25 ])) >>> m.sample() # equal probability of 0, 1, 2, 3 tensor(3)
- Parameters
probs (Tensor) – event probabilities
logits (Tensor) – event log probabilities (unnormalized)
Cauchy¶
- class Cauchy(loc, scale, validate_args=None)¶
Wraps
torch.distributions.cauchy.Cauchy
withTorchDistributionMixin
.Samples from a Cauchy (Lorentz) distribution. The distribution of the ratio of independent normally distributed random variables with means 0 follows a Cauchy distribution.
Example:
>>> m = Cauchy(torch.tensor([0.0]), torch.tensor([1.0])) >>> m.sample() # sample from a Cauchy distribution with loc=0 and scale=1 tensor([ 2.3214])
Chi2¶
- class Chi2(df, validate_args=None)¶
Wraps
torch.distributions.chi2.Chi2
withTorchDistributionMixin
.Creates a Chi-squared distribution parameterized by shape parameter
df
. This is exactly equivalent toGamma(alpha=0.5*df, beta=0.5)
Example:
>>> m = Chi2(torch.tensor([1.0])) >>> m.sample() # Chi2 distributed with shape df=1 tensor([ 0.1046])
- Parameters
df (float or Tensor) – shape parameter of the distribution
ContinuousBernoulli¶
- class ContinuousBernoulli(probs=None, logits=None, lims=(0.499, 0.501), validate_args=None)¶
Wraps
torch.distributions.continuous_bernoulli.ContinuousBernoulli
withTorchDistributionMixin
.Creates a continuous Bernoulli distribution parameterized by
probs
orlogits
(but not both).The distribution is supported in [0, 1] and parameterized by ‘probs’ (in (0,1)) or ‘logits’ (real-valued). Note that, unlike the Bernoulli, ‘probs’ does not correspond to a probability and ‘logits’ does not correspond to log-odds, but the same names are used due to the similarity with the Bernoulli. See [1] for more details.
Example:
>>> m = ContinuousBernoulli(torch.tensor([0.3])) >>> m.sample() tensor([ 0.2538])
- Parameters
probs (Number, Tensor) – (0,1) valued parameters
logits (Number, Tensor) – real valued parameters whose sigmoid matches ‘probs’
[1] The continuous Bernoulli: fixing a pervasive error in variational autoencoders, Loaiza-Ganem G and Cunningham JP, NeurIPS 2019. https://arxiv.org/abs/1907.06845
Dirichlet¶
- class Dirichlet(concentration, validate_args=None)[source]¶
Wraps
torch.distributions.dirichlet.Dirichlet
withTorchDistributionMixin
.Creates a Dirichlet distribution parameterized by concentration
concentration
.Example:
>>> m = Dirichlet(torch.tensor([0.5, 0.5])) >>> m.sample() # Dirichlet distributed with concentrarion concentration tensor([ 0.1046, 0.8954])
- Parameters
concentration (Tensor) – concentration parameter of the distribution (often referred to as alpha)
Exponential¶
- class Exponential(rate, validate_args=None)¶
Wraps
torch.distributions.exponential.Exponential
withTorchDistributionMixin
.Creates a Exponential distribution parameterized by
rate
.Example:
>>> m = Exponential(torch.tensor([1.0])) >>> m.sample() # Exponential distributed with rate=1 tensor([ 0.1046])
- Parameters
rate (float or Tensor) – rate = 1 / scale of the distribution
ExponentialFamily¶
- class ExponentialFamily(batch_shape=torch.Size([]), event_shape=torch.Size([]), validate_args=None)¶
Wraps
torch.distributions.exp_family.ExponentialFamily
withTorchDistributionMixin
.ExponentialFamily is the abstract base class for probability distributions belonging to an exponential family, whose probability mass/density function has the form is defined below
\[p_{F}(x; \theta) = \exp(\langle t(x), \theta\rangle - F(\theta) + k(x))\]where \(\theta\) denotes the natural parameters, \(t(x)\) denotes the sufficient statistic, \(F(\theta)\) is the log normalizer function for a given family and \(k(x)\) is the carrier measure.
Note
This class is an intermediary between the Distribution class and distributions which belong to an exponential family mainly to check the correctness of the .entropy() and analytic KL divergence methods. We use this class to compute the entropy and KL divergence using the AD framework and Bregman divergences (courtesy of: Frank Nielsen and Richard Nock, Entropies and Cross-entropies of Exponential Families).
FisherSnedecor¶
- class FisherSnedecor(df1, df2, validate_args=None)¶
Wraps
torch.distributions.fishersnedecor.FisherSnedecor
withTorchDistributionMixin
.Creates a Fisher-Snedecor distribution parameterized by
df1
anddf2
.Example:
>>> m = FisherSnedecor(torch.tensor([1.0]), torch.tensor([2.0])) >>> m.sample() # Fisher-Snedecor-distributed with df1=1 and df2=2 tensor([ 0.2453])
Gamma¶
- class Gamma(concentration, rate, validate_args=None)[source]¶
Wraps
torch.distributions.gamma.Gamma
withTorchDistributionMixin
.Creates a Gamma distribution parameterized by shape
concentration
andrate
.Example:
>>> m = Gamma(torch.tensor([1.0]), torch.tensor([1.0])) >>> m.sample() # Gamma distributed with concentration=1 and rate=1 tensor([ 0.1046])
Geometric¶
- class Geometric(probs=None, logits=None, validate_args=None)[source]¶
Wraps
torch.distributions.geometric.Geometric
withTorchDistributionMixin
.Creates a Geometric distribution parameterized by
probs
, whereprobs
is the probability of success of Bernoulli trials. It represents the probability that in \(k + 1\) Bernoulli trials, the first \(k\) trials failed, before seeing a success.Samples are non-negative integers [0, \(\inf\)).
Example:
>>> m = Geometric(torch.tensor([0.3])) >>> m.sample() # underlying Bernoulli has 30% chance 1; 70% chance 0 tensor([ 2.])
- Parameters
probs (Number, Tensor) – the probability of sampling 1. Must be in range (0, 1]
logits (Number, Tensor) – the log-odds of sampling 1.
Gumbel¶
- class Gumbel(loc, scale, validate_args=None)¶
Wraps
torch.distributions.gumbel.Gumbel
withTorchDistributionMixin
.Samples from a Gumbel Distribution.
Examples:
>>> m = Gumbel(torch.tensor([1.0]), torch.tensor([2.0])) >>> m.sample() # sample from Gumbel distribution with loc=1, scale=2 tensor([ 1.0124])
HalfCauchy¶
- class HalfCauchy(scale, validate_args=None)¶
Wraps
torch.distributions.half_cauchy.HalfCauchy
withTorchDistributionMixin
.Creates a half-Cauchy distribution parameterized by scale where:
X ~ Cauchy(0, scale) Y = |X| ~ HalfCauchy(scale)
Example:
>>> m = HalfCauchy(torch.tensor([1.0])) >>> m.sample() # half-cauchy distributed with scale=1 tensor([ 2.3214])
- Parameters
scale (float or Tensor) – scale of the full Cauchy distribution
HalfNormal¶
- class HalfNormal(scale, validate_args=None)¶
Wraps
torch.distributions.half_normal.HalfNormal
withTorchDistributionMixin
.Creates a half-normal distribution parameterized by scale where:
X ~ Normal(0, scale) Y = |X| ~ HalfNormal(scale)
Example:
>>> m = HalfNormal(torch.tensor([1.0])) >>> m.sample() # half-normal distributed with scale=1 tensor([ 0.1046])
- Parameters
scale (float or Tensor) – scale of the full Normal distribution
Independent¶
- class Independent(base_distribution, reinterpreted_batch_ndims, validate_args=None)[source]¶
Wraps
torch.distributions.independent.Independent
withTorchDistributionMixin
.Reinterprets some of the batch dims of a distribution as event dims.
This is mainly useful for changing the shape of the result of
log_prob()
. For example to create a diagonal Normal distribution with the same shape as a Multivariate Normal distribution (so they are interchangeable), you can:>>> loc = torch.zeros(3) >>> scale = torch.ones(3) >>> mvn = MultivariateNormal(loc, scale_tril=torch.diag(scale)) >>> [mvn.batch_shape, mvn.event_shape] [torch.Size(()), torch.Size((3,))] >>> normal = Normal(loc, scale) >>> [normal.batch_shape, normal.event_shape] [torch.Size((3,)), torch.Size(())] >>> diagn = Independent(normal, 1) >>> [diagn.batch_shape, diagn.event_shape] [torch.Size(()), torch.Size((3,))]
- Parameters
base_distribution (torch.distributions.distribution.Distribution) – a base distribution
reinterpreted_batch_ndims (int) – the number of batch dims to reinterpret as event dims
Kumaraswamy¶
- class Kumaraswamy(concentration1, concentration0, validate_args=None)¶
Wraps
torch.distributions.kumaraswamy.Kumaraswamy
withTorchDistributionMixin
.Samples from a Kumaraswamy distribution.
Example:
>>> m = Kumaraswamy(torch.tensor([1.0]), torch.tensor([1.0])) >>> m.sample() # sample from a Kumaraswamy distribution with concentration alpha=1 and beta=1 tensor([ 0.1729])
LKJCholesky¶
- class LKJCholesky(dim, concentration=1.0, validate_args=None)¶
Wraps
torch.distributions.lkj_cholesky.LKJCholesky
withTorchDistributionMixin
.LKJ distribution for lower Cholesky factor of correlation matrices. The distribution is controlled by
concentration
parameter \(\eta\) to make the probability of the correlation matrix \(M\) generated from a Cholesky factor propotional to \(\det(M)^{\eta - 1}\). Because of that, whenconcentration == 1
, we have a uniform distribution over Cholesky factors of correlation matrices. Note that this distribution samples the Cholesky factor of correlation matrices and not the correlation matrices themselves and thereby differs slightly from the derivations in [1] for the LKJCorr distribution. For sampling, this uses the Onion method from [1] Section 3.L ~ LKJCholesky(dim, concentration) X = L @ L’ ~ LKJCorr(dim, concentration)
Example:
>>> l = LKJCholesky(3, 0.5) >>> l.sample() # l @ l.T is a sample of a correlation 3x3 matrix tensor([[ 1.0000, 0.0000, 0.0000], [ 0.3516, 0.9361, 0.0000], [-0.1899, 0.4748, 0.8593]])
- Parameters
dimension (dim) – dimension of the matrices
concentration (float or Tensor) – concentration/shape parameter of the distribution (often referred to as eta)
References
[1] Generating random correlation matrices based on vines and extended onion method, Daniel Lewandowski, Dorota Kurowicka, Harry Joe.
Laplace¶
- class Laplace(loc, scale, validate_args=None)¶
Wraps
torch.distributions.laplace.Laplace
withTorchDistributionMixin
.Creates a Laplace distribution parameterized by
loc
andscale
.Example:
>>> m = Laplace(torch.tensor([0.0]), torch.tensor([1.0])) >>> m.sample() # Laplace distributed with loc=0, scale=1 tensor([ 0.1046])
LogNormal¶
- class LogNormal(loc, scale, validate_args=None)[source]¶
Wraps
torch.distributions.log_normal.LogNormal
withTorchDistributionMixin
.Creates a log-normal distribution parameterized by
loc
andscale
where:X ~ Normal(loc, scale) Y = exp(X) ~ LogNormal(loc, scale)
Example:
>>> m = LogNormal(torch.tensor([0.0]), torch.tensor([1.0])) >>> m.sample() # log-normal distributed with mean=0 and stddev=1 tensor([ 0.1046])
LogisticNormal¶
- class LogisticNormal(loc, scale, validate_args=None)¶
Wraps
torch.distributions.logistic_normal.LogisticNormal
withTorchDistributionMixin
.Creates a logistic-normal distribution parameterized by
loc
andscale
that define the base Normal distribution transformed with the StickBreakingTransform such that:X ~ LogisticNormal(loc, scale) Y = log(X / (1 - X.cumsum(-1)))[..., :-1] ~ Normal(loc, scale)
- Parameters
Example:
>>> # logistic-normal distributed with mean=(0, 0, 0) and stddev=(1, 1, 1) >>> # of the base Normal distribution >>> m = distributions.LogisticNormal(torch.tensor([0.0] * 3), torch.tensor([1.0] * 3)) >>> m.sample() tensor([ 0.7653, 0.0341, 0.0579, 0.1427])
LowRankMultivariateNormal¶
- class LowRankMultivariateNormal(loc, cov_factor, cov_diag, validate_args=None)[source]¶
Wraps
torch.distributions.lowrank_multivariate_normal.LowRankMultivariateNormal
withTorchDistributionMixin
.Creates a multivariate normal distribution with covariance matrix having a low-rank form parameterized by
cov_factor
andcov_diag
:covariance_matrix = cov_factor @ cov_factor.T + cov_diag
Example
>>> m = LowRankMultivariateNormal(torch.zeros(2), torch.tensor([[1.], [0.]]), torch.ones(2)) >>> m.sample() # normally distributed with mean=`[0,0]`, cov_factor=`[[1],[0]]`, cov_diag=`[1,1]` tensor([-0.2102, -0.5429])
- Parameters
loc (Tensor) – mean of the distribution with shape batch_shape + event_shape
cov_factor (Tensor) – factor part of low-rank form of covariance matrix with shape batch_shape + event_shape + (rank,)
cov_diag (Tensor) – diagonal part of low-rank form of covariance matrix with shape batch_shape + event_shape
Note
The computation for determinant and inverse of covariance matrix is avoided when cov_factor.shape[1] << cov_factor.shape[0] thanks to Woodbury matrix identity and matrix determinant lemma. Thanks to these formulas, we just need to compute the determinant and inverse of the small size “capacitance” matrix:
capacitance = I + cov_factor.T @ inv(cov_diag) @ cov_factor
MixtureSameFamily¶
- class MixtureSameFamily(mixture_distribution, component_distribution, validate_args=None)¶
Wraps
torch.distributions.mixture_same_family.MixtureSameFamily
withTorchDistributionMixin
.The MixtureSameFamily distribution implements a (batch of) mixture distribution where all component are from different parameterizations of the same distribution type. It is parameterized by a Categorical “selecting distribution” (over k component) and a component distribution, i.e., a Distribution with a rightmost batch shape (equal to [k]) which indexes each (batch of) component.
Examples:
# Construct Gaussian Mixture Model in 1D consisting of 5 equally # weighted normal distributions >>> mix = D.Categorical(torch.ones(5,)) >>> comp = D.Normal(torch.randn(5,), torch.rand(5,)) >>> gmm = MixtureSameFamily(mix, comp) # Construct Gaussian Mixture Modle in 2D consisting of 5 equally # weighted bivariate normal distributions >>> mix = D.Categorical(torch.ones(5,)) >>> comp = D.Independent(D.Normal( torch.randn(5,2), torch.rand(5,2)), 1) >>> gmm = MixtureSameFamily(mix, comp) # Construct a batch of 3 Gaussian Mixture Models in 2D each # consisting of 5 random weighted bivariate normal distributions >>> mix = D.Categorical(torch.rand(3,5)) >>> comp = D.Independent(D.Normal( torch.randn(3,5,2), torch.rand(3,5,2)), 1) >>> gmm = MixtureSameFamily(mix, comp)
- Parameters
mixture_distribution – torch.distributions.Categorical-like instance. Manages the probability of selecting component. The number of categories must match the rightmost batch dimension of the component_distribution. Must have either scalar batch_shape or batch_shape matching component_distribution.batch_shape[:-1]
component_distribution – torch.distributions.Distribution-like instance. Right-most batch dimension indexes component.
Multinomial¶
- class Multinomial(total_count=1, probs=None, logits=None, validate_args=None)[source]¶
Wraps
torch.distributions.multinomial.Multinomial
withTorchDistributionMixin
.Creates a Multinomial distribution parameterized by
total_count
and eitherprobs
orlogits
(but not both). The innermost dimension ofprobs
indexes over categories. All other dimensions index over batches.Note that
total_count
need not be specified if onlylog_prob()
is called (see example below)Note
The probs argument must be non-negative, finite and have a non-zero sum, and it will be normalized to sum to 1 along the last dimension.
probs
will return this normalized value. The logits argument will be interpreted as unnormalized log probabilities and can therefore be any real number. It will likewise be normalized so that the resulting probabilities sum to 1 along the last dimension.logits
will return this normalized value.sample()
requires a single shared total_count for all parameters and samples.log_prob()
allows different total_count for each parameter and sample.
Example:
>>> m = Multinomial(100, torch.tensor([ 1., 1., 1., 1.])) >>> x = m.sample() # equal probability of 0, 1, 2, 3 tensor([ 21., 24., 30., 25.]) >>> Multinomial(probs=torch.tensor([1., 1., 1., 1.])).log_prob(x) tensor([-4.1338])
- Parameters
total_count (int) – number of trials
probs (Tensor) – event probabilities
logits (Tensor) – event log probabilities (unnormalized)
MultivariateNormal¶
- class MultivariateNormal(loc, covariance_matrix=None, precision_matrix=None, scale_tril=None, validate_args=None)[source]¶
Wraps
torch.distributions.multivariate_normal.MultivariateNormal
withTorchDistributionMixin
.Creates a multivariate normal (also called Gaussian) distribution parameterized by a mean vector and a covariance matrix.
The multivariate normal distribution can be parameterized either in terms of a positive definite covariance matrix \(\mathbf{\Sigma}\) or a positive definite precision matrix \(\mathbf{\Sigma}^{-1}\) or a lower-triangular matrix \(\mathbf{L}\) with positive-valued diagonal entries, such that \(\mathbf{\Sigma} = \mathbf{L}\mathbf{L}^\top\). This triangular matrix can be obtained via e.g. Cholesky decomposition of the covariance.
Example
>>> m = MultivariateNormal(torch.zeros(2), torch.eye(2)) >>> m.sample() # normally distributed with mean=`[0,0]` and covariance_matrix=`I` tensor([-0.2102, -0.5429])
- Parameters
loc (Tensor) – mean of the distribution
covariance_matrix (Tensor) – positive-definite covariance matrix
precision_matrix (Tensor) – positive-definite precision matrix
scale_tril (Tensor) – lower-triangular factor of covariance, with positive-valued diagonal
Note
Only one of
covariance_matrix
orprecision_matrix
orscale_tril
can be specified.Using
scale_tril
will be more efficient: all computations internally are based onscale_tril
. Ifcovariance_matrix
orprecision_matrix
is passed instead, it is only used to compute the corresponding lower triangular matrices using a Cholesky decomposition.
NegativeBinomial¶
- class NegativeBinomial(total_count, probs=None, logits=None, validate_args=None)¶
Wraps
torch.distributions.negative_binomial.NegativeBinomial
withTorchDistributionMixin
.Creates a Negative Binomial distribution, i.e. distribution of the number of successful independent and identical Bernoulli trials before
total_count
failures are achieved. The probability of success of each Bernoulli trial isprobs
.- Parameters
total_count (float or Tensor) – non-negative number of negative Bernoulli trials to stop, although the distribution is still valid for real valued count
probs (Tensor) – Event probabilities of success in the half open interval [0, 1)
logits (Tensor) – Event log-odds for probabilities of success
Normal¶
- class Normal(loc, scale, validate_args=None)[source]¶
Wraps
torch.distributions.normal.Normal
withTorchDistributionMixin
.Creates a normal (also called Gaussian) distribution parameterized by
loc
andscale
.Example:
>>> m = Normal(torch.tensor([0.0]), torch.tensor([1.0])) >>> m.sample() # normally distributed with loc=0 and scale=1 tensor([ 0.1046])
OneHotCategorical¶
- class OneHotCategorical(probs=None, logits=None, validate_args=None)[source]¶
Wraps
torch.distributions.one_hot_categorical.OneHotCategorical
withTorchDistributionMixin
.Creates a one-hot categorical distribution parameterized by
probs
orlogits
.Samples are one-hot coded vectors of size
probs.size(-1)
.Note
The probs argument must be non-negative, finite and have a non-zero sum, and it will be normalized to sum to 1 along the last dimension.
probs
will return this normalized value. The logits argument will be interpreted as unnormalized log probabilities and can therefore be any real number. It will likewise be normalized so that the resulting probabilities sum to 1 along the last dimension.logits
will return this normalized value.See also:
torch.distributions.Categorical()
for specifications ofprobs
andlogits
.Example:
>>> m = OneHotCategorical(torch.tensor([ 0.25, 0.25, 0.25, 0.25 ])) >>> m.sample() # equal probability of 0, 1, 2, 3 tensor([ 0., 0., 0., 1.])
- Parameters
probs (Tensor) – event probabilities
logits (Tensor) – event log probabilities (unnormalized)
OneHotCategoricalStraightThrough¶
- class OneHotCategoricalStraightThrough(probs=None, logits=None, validate_args=None)¶
Wraps
torch.distributions.one_hot_categorical.OneHotCategoricalStraightThrough
withTorchDistributionMixin
.Creates a reparameterizable
OneHotCategorical
distribution based on the straight- through gradient estimator from [1].[1] Estimating or Propagating Gradients Through Stochastic Neurons for Conditional Computation (Bengio et al, 2013)
Pareto¶
- class Pareto(scale, alpha, validate_args=None)¶
Wraps
torch.distributions.pareto.Pareto
withTorchDistributionMixin
.Samples from a Pareto Type 1 distribution.
Example:
>>> m = Pareto(torch.tensor([1.0]), torch.tensor([1.0])) >>> m.sample() # sample from a Pareto distribution with scale=1 and alpha=1 tensor([ 1.5623])
Poisson¶
- class Poisson(rate, *, is_sparse=False, validate_args=None)[source]¶
Wraps
torch.distributions.poisson.Poisson
withTorchDistributionMixin
.Creates a Poisson distribution parameterized by
rate
, the rate parameter.Samples are nonnegative integers, with a pmf given by
\[\mathrm{rate}^k \frac{e^{-\mathrm{rate}}}{k!}\]Example:
>>> m = Poisson(torch.tensor([4])) >>> m.sample() tensor([ 3.])
- Parameters
rate (Number, Tensor) – the rate parameter
RelaxedBernoulli¶
- class RelaxedBernoulli(temperature, probs=None, logits=None, validate_args=None)¶
Wraps
torch.distributions.relaxed_bernoulli.RelaxedBernoulli
withTorchDistributionMixin
.Creates a RelaxedBernoulli distribution, parametrized by
temperature
, and eitherprobs
orlogits
(but not both). This is a relaxed version of the Bernoulli distribution, so the values are in (0, 1), and has reparametrizable samples.Example:
>>> m = RelaxedBernoulli(torch.tensor([2.2]), torch.tensor([0.1, 0.2, 0.3, 0.99])) >>> m.sample() tensor([ 0.2951, 0.3442, 0.8918, 0.9021])
- Parameters
temperature (Tensor) – relaxation temperature
probs (Number, Tensor) – the probability of sampling 1
logits (Number, Tensor) – the log-odds of sampling 1
RelaxedOneHotCategorical¶
- class RelaxedOneHotCategorical(temperature, probs=None, logits=None, validate_args=None)¶
Wraps
torch.distributions.relaxed_categorical.RelaxedOneHotCategorical
withTorchDistributionMixin
.Creates a RelaxedOneHotCategorical distribution parametrized by
temperature
, and eitherprobs
orlogits
. This is a relaxed version of theOneHotCategorical
distribution, so its samples are on simplex, and are reparametrizable.Example:
>>> m = RelaxedOneHotCategorical(torch.tensor([2.2]), torch.tensor([0.1, 0.2, 0.3, 0.4])) >>> m.sample() tensor([ 0.1294, 0.2324, 0.3859, 0.2523])
- Parameters
temperature (Tensor) – relaxation temperature
probs (Tensor) – event probabilities
logits (Tensor) – unnormalized log probability for each event
StudentT¶
- class StudentT(df, loc=0.0, scale=1.0, validate_args=None)¶
Wraps
torch.distributions.studentT.StudentT
withTorchDistributionMixin
.Creates a Student’s t-distribution parameterized by degree of freedom
df
, meanloc
and scalescale
.Example:
>>> m = StudentT(torch.tensor([2.0])) >>> m.sample() # Student's t-distributed with degrees of freedom=2 tensor([ 0.1046])
TransformedDistribution¶
- class TransformedDistribution(base_distribution, transforms, validate_args=None)¶
Wraps
torch.distributions.transformed_distribution.TransformedDistribution
withTorchDistributionMixin
.Extension of the Distribution class, which applies a sequence of Transforms to a base distribution. Let f be the composition of transforms applied:
X ~ BaseDistribution Y = f(X) ~ TransformedDistribution(BaseDistribution, f) log p(Y) = log p(X) + log |det (dX/dY)|
Note that the
.event_shape
of aTransformedDistribution
is the maximum shape of its base distribution and its transforms, since transforms can introduce correlations among events.An example for the usage of
TransformedDistribution
would be:# Building a Logistic Distribution # X ~ Uniform(0, 1) # f = a + b * logit(X) # Y ~ f(X) ~ Logistic(a, b) base_distribution = Uniform(0, 1) transforms = [SigmoidTransform().inv, AffineTransform(loc=a, scale=b)] logistic = TransformedDistribution(base_distribution, transforms)
For more examples, please look at the implementations of
Gumbel
,HalfCauchy
,HalfNormal
,LogNormal
,Pareto
,Weibull
,RelaxedBernoulli
andRelaxedOneHotCategorical
Uniform¶
- class Uniform(low, high, validate_args=None)[source]¶
Wraps
torch.distributions.uniform.Uniform
withTorchDistributionMixin
.Generates uniformly distributed random samples from the half-open interval
[low, high)
.Example:
>>> m = Uniform(torch.tensor([0.0]), torch.tensor([5.0])) >>> m.sample() # uniformly distributed in the range [0.0, 5.0) tensor([ 2.3418])
VonMises¶
- class VonMises(loc, concentration, validate_args=None)¶
Wraps
torch.distributions.von_mises.VonMises
withTorchDistributionMixin
.A circular von Mises distribution.
This implementation uses polar coordinates. The
loc
andvalue
args can be any real number (to facilitate unconstrained optimization), but are interpreted as angles modulo 2 pi.- Example::
>>> m = dist.VonMises(torch.tensor([1.0]), torch.tensor([1.0])) >>> m.sample() # von Mises distributed with loc=1 and concentration=1 tensor([1.9777])
- Parameters
loc (torch.Tensor) – an angle in radians.
concentration (torch.Tensor) – concentration parameter
Weibull¶
- class Weibull(scale, concentration, validate_args=None)¶
Wraps
torch.distributions.weibull.Weibull
withTorchDistributionMixin
.Samples from a two-parameter Weibull distribution.
Example
>>> m = Weibull(torch.tensor([1.0]), torch.tensor([1.0])) >>> m.sample() # sample from a Weibull distribution with scale=1, concentration=1 tensor([ 0.4784])
Wishart¶
- class Wishart(df: Union[torch.Tensor, numbers.Number], covariance_matrix: torch.Tensor = None, precision_matrix: torch.Tensor = None, scale_tril: torch.Tensor = None, validate_args=None)¶
Wraps
torch.distributions.wishart.Wishart
withTorchDistributionMixin
.Creates a Wishart distribution parameterized by a symmetric positive definite matrix \(\Sigma\), or its Cholesky decomposition \(\mathbf{\Sigma} = \mathbf{L}\mathbf{L}^\top\)
Example
>>> m = Wishart(torch.eye(2), torch.Tensor([2])) >>> m.sample() #Wishart distributed with mean=`df * I` and #variance(x_ij)=`df` for i != j and variance(x_ij)=`2 * df` for i == j
- Parameters
covariance_matrix (Tensor) – positive-definite covariance matrix
precision_matrix (Tensor) – positive-definite precision matrix
scale_tril (Tensor) – lower-triangular factor of covariance, with positive-valued diagonal
df (float or Tensor) – real-valued parameter larger than the (dimension of Square matrix) - 1
Note
Only one of
covariance_matrix
orprecision_matrix
orscale_tril
can be specified. Usingscale_tril
will be more efficient: all computations internally are based onscale_tril
. Ifcovariance_matrix
orprecision_matrix
is passed instead, it is only used to compute the corresponding lower triangular matrices using a Cholesky decomposition. ‘torch.distributions.LKJCholesky’ is a restricted Wishart distribution.[1]References
[1] On equivalence of the LKJ distribution and the restricted Wishart distribution, Zhenxun Wang, Yunan Wu, Haitao Chu.
Pyro Distributions¶
Abstract Distribution¶
- class Distribution(*args, **kwargs)[source]¶
Bases:
object
Base class for parameterized probability distributions.
Distributions in Pyro are stochastic function objects with
sample()
andlog_prob()
methods. Distribution are stochastic functions with fixed parameters:d = dist.Bernoulli(param) x = d() # Draws a random sample. p = d.log_prob(x) # Evaluates log probability of x.
Implementing New Distributions:
Derived classes must implement the methods:
sample()
,log_prob()
.Examples:
Take a look at the examples to see how they interact with inference algorithms.
- has_rsample = False¶
- has_enumerate_support = False¶
- __call__(*args, **kwargs)[source]¶
Samples a random value (just an alias for
.sample(*args, **kwargs)
).For tensor distributions, the returned tensor should have the same
.shape
as the parameters.- Returns
A random value.
- Return type
- abstract sample(*args, **kwargs)[source]¶
Samples a random value.
For tensor distributions, the returned tensor should have the same
.shape
as the parameters, unless otherwise noted.- Parameters
sample_shape (torch.Size) – the size of the iid batch to be drawn from the distribution.
- Returns
A random value or batch of random values (if parameters are batched). The shape of the result should be
self.shape()
.- Return type
- abstract log_prob(x, *args, **kwargs)[source]¶
Evaluates log probability densities for each of a batch of samples.
- Parameters
x (torch.Tensor) – A single value or a batch of values batched along axis 0.
- Returns
log probability densities as a one-dimensional
Tensor
with same batch size as value and params. The shape of the result should beself.batch_size
.- Return type
- score_parts(x, *args, **kwargs)[source]¶
Computes ingredients for stochastic gradient estimators of ELBO.
The default implementation is correct both for non-reparameterized and for fully reparameterized distributions. Partially reparameterized distributions should override this method to compute correct .score_function and .entropy_term parts.
Setting
.has_rsample
on a distribution instance will determine whether inference engines likeSVI
use reparameterized samplers or the score function estimator.- Parameters
x (torch.Tensor) – A single value or batch of values.
- Returns
A ScoreParts object containing parts of the ELBO estimator.
- Return type
ScoreParts
- enumerate_support(expand=True)[source]¶
Returns a representation of the parametrized distribution’s support, along the first dimension. This is implemented only by discrete distributions.
Note that this returns support values of all the batched RVs in lock-step, rather than the full cartesian product.
- Parameters
expand (bool) – whether to expand the result to a tensor of shape
(n,) + batch_shape + event_shape
. If false, the return value has unexpanded shape(n,) + (1,)*len(batch_shape) + event_shape
which can be broadcasted to the full shape.- Returns
An iterator over the distribution’s discrete support.
- Return type
iterator
- conjugate_update(other)[source]¶
EXPERIMENTAL Creates an updated distribution fusing information from another compatible distribution. This is supported by only a few conjugate distributions.
This should satisfy the equation:
fg, log_normalizer = f.conjugate_update(g) assert f.log_prob(x) + g.log_prob(x) == fg.log_prob(x) + log_normalizer
Note this is equivalent to
funsor.ops.add
onFunsor
distributions, but we return a lazy sum(updated, log_normalizer)
because PyTorch distributions must be normalized. Thusconjugate_update()
should commute withdist_to_funsor()
andtensor_to_funsor()
dist_to_funsor(f) + dist_to_funsor(g) == dist_to_funsor(fg) + tensor_to_funsor(log_normalizer)
- Parameters
other – A distribution representing
p(data|latent)
but normalized overlatent
rather thandata
. Herelatent
is a candidate sample fromself
anddata
is a ground observation of unrelated type.- Returns
a pair
(updated,log_normalizer)
whereupdated
is an updated distribution of typetype(self)
, andlog_normalizer
is aTensor
representing the normalization factor.
- has_rsample_(value)[source]¶
Force reparameterized or detached sampling on a single distribution instance. This sets the
.has_rsample
attribute in-place.This is useful to instruct inference algorithms to avoid reparameterized gradients for variables that discontinuously determine downstream control flow.
- Parameters
value (bool) – Whether samples will be pathwise differentiable.
- Returns
self
- Return type
- property rv¶
EXPERIMENTAL Switch to the Random Variable DSL for applying transformations to random variables. Supports either chaining operations or arithmetic operator overloading.
Example usage:
# This should be equivalent to an Exponential distribution. Uniform(0, 1).rv.log().neg().dist # These two distributions Y1, Y2 should be the same X = Uniform(0, 1).rv Y1 = X.mul(4).pow(0.5).sub(1).abs().neg().dist Y2 = (-abs((4*X)**(0.5) - 1)).dist
- Returns
A :class: ~pyro.contrib.randomvariable.random_variable.RandomVariable object wrapping this distribution.
- Return type
TorchDistributionMixin¶
- class TorchDistributionMixin(*args, **kwargs)[source]¶
Bases:
pyro.distributions.distribution.Distribution
Mixin to provide Pyro compatibility for PyTorch distributions.
You should instead use TorchDistribution for new distribution classes.
This is mainly useful for wrapping existing PyTorch distributions for use in Pyro. Derived classes must first inherit from
torch.distributions.distribution.Distribution
and then inherit fromTorchDistributionMixin
.- __call__(sample_shape=torch.Size([]))[source]¶
Samples a random value.
This is reparameterized whenever possible, calling
rsample()
for reparameterized distributions andsample()
for non-reparameterized distributions.- Parameters
sample_shape (torch.Size) – the size of the iid batch to be drawn from the distribution.
- Returns
A random value or batch of random values (if parameters are batched). The shape of the result should be self.shape().
- Return type
- property event_dim¶
Number of dimensions of individual events. :rtype: int
- Type
return
- shape(sample_shape=torch.Size([]))[source]¶
The tensor shape of samples from this distribution.
Samples are of shape:
d.shape(sample_shape) == sample_shape + d.batch_shape + d.event_shape
- Parameters
sample_shape (torch.Size) – the size of the iid batch to be drawn from the distribution.
- Returns
Tensor shape of samples.
- Return type
torch.Size
- classmethod infer_shapes(**arg_shapes)[source]¶
Infers
batch_shape
andevent_shape
given shapes of args to__init__()
.Note
This assumes distribution shape depends only on the shapes of tensor inputs, not in the data contained in those inputs.
- Parameters
**arg_shapes – Keywords mapping name of input arg to
torch.Size
or tuple representing the sizes of each tensor input.- Returns
A pair
(batch_shape, event_shape)
of the shapes of a distribution that would be created with input args of the given shapes.- Return type
- expand(batch_shape, _instance=None)[source]¶
Returns a new
ExpandedDistribution
instance with batch dimensions expanded to batch_shape.- Parameters
batch_shape (tuple) – batch shape to expand to.
_instance – unused argument for compatibility with
torch.distributions.Distribution.expand()
- Returns
an instance of ExpandedDistribution.
- Return type
ExpandedDistribution
- expand_by(sample_shape)[source]¶
Expands a distribution by adding
sample_shape
to the left side of itsbatch_shape
.To expand internal dims of
self.batch_shape
from 1 to something larger, useexpand()
instead.- Parameters
sample_shape (torch.Size) – The size of the iid batch to be drawn from the distribution.
- Returns
An expanded version of this distribution.
- Return type
ExpandedDistribution
- to_event(reinterpreted_batch_ndims=None)[source]¶
Reinterprets the
n
rightmost dimensions of this distributionsbatch_shape
as event dims, adding them to the left side ofevent_shape
.Example
>>> [d1.batch_shape, d1.event_shape] [torch.Size([2, 3]), torch.Size([4, 5])] >>> d2 = d1.to_event(1) >>> [d2.batch_shape, d2.event_shape] [torch.Size([2]), torch.Size([3, 4, 5])] >>> d3 = d1.to_event(2) >>> [d3.batch_shape, d3.event_shape] [torch.Size([]), torch.Size([2, 3, 4, 5])]
- Parameters
reinterpreted_batch_ndims (int) – The number of batch dimensions to reinterpret as event dimensions. May be negative to remove dimensions from an
pyro.distributions.torch.Independent
. If None, convert all dimensions to event dimensions.- Returns
A reshaped version of this distribution.
- Return type
- mask(mask)[source]¶
Masks a distribution by a boolean or boolean-valued tensor that is broadcastable to the distributions
batch_shape
.- Parameters
mask (bool or torch.Tensor) – A boolean or boolean valued tensor.
- Returns
A masked copy of this distribution.
- Return type
TorchDistribution¶
- class TorchDistribution(batch_shape=torch.Size([]), event_shape=torch.Size([]), validate_args=None)[source]¶
Bases:
torch.distributions.distribution.Distribution
,pyro.distributions.torch_distribution.TorchDistributionMixin
Base class for PyTorch-compatible distributions with Pyro support.
This should be the base class for almost all new Pyro distributions.
Note
Parameters and data should be of type
Tensor
and all methods return typeTensor
unless otherwise noted.Tensor Shapes:
TorchDistributions provide a method
.shape()
for the tensor shape of samples:x = d.sample(sample_shape) assert x.shape == d.shape(sample_shape)
Pyro follows the same distribution shape semantics as PyTorch. It distinguishes between three different roles for tensor shapes of samples:
sample shape corresponds to the shape of the iid samples drawn from the distribution. This is taken as an argument by the distribution’s sample method.
batch shape corresponds to non-identical (independent) parameterizations of the distribution, inferred from the distribution’s parameter shapes. This is fixed for a distribution instance.
event shape corresponds to the event dimensions of the distribution, which is fixed for a distribution class. These are collapsed when we try to score a sample from the distribution via d.log_prob(x).
These shapes are related by the equation:
assert d.shape(sample_shape) == sample_shape + d.batch_shape + d.event_shape
Distributions provide a vectorized
log_prob()
method that evaluates the log probability density of each event in a batch independently, returning a tensor of shapesample_shape + d.batch_shape
:x = d.sample(sample_shape) assert x.shape == d.shape(sample_shape) log_p = d.log_prob(x) assert log_p.shape == sample_shape + d.batch_shape
Implementing New Distributions:
Derived classes must implement the methods
sample()
(orrsample()
if.has_rsample == True
) andlog_prob()
, and must implement the propertiesbatch_shape
, andevent_shape
. Discrete classes may also implement theenumerate_support()
method to improve gradient estimates and set.has_enumerate_support = True
.- expand(batch_shape, _instance=None)¶
Returns a new
ExpandedDistribution
instance with batch dimensions expanded to batch_shape.- Parameters
batch_shape (tuple) – batch shape to expand to.
_instance – unused argument for compatibility with
torch.distributions.Distribution.expand()
- Returns
an instance of ExpandedDistribution.
- Return type
ExpandedDistribution
AffineBeta¶
- class AffineBeta(concentration1, concentration0, loc, scale, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.TransformedDistribution
Beta distribution scaled by
scale
and shifted byloc
:X ~ Beta(concentration1, concentration0) f(X) = loc + scale * X Y = f(X) ~ AffineBeta(concentration1, concentration0, loc, scale)
- Parameters
concentration1 (float or torch.Tensor) – 1st concentration parameter (alpha) for the Beta distribution.
concentration0 (float or torch.Tensor) – 2nd concentration parameter (beta) for the Beta distribution.
loc (float or torch.Tensor) – location parameter.
scale (float or torch.Tensor) – scale parameter.
- arg_constraints: Dict[str, torch.distributions.constraints.Constraint] = {'concentration0': GreaterThan(lower_bound=0.0), 'concentration1': GreaterThan(lower_bound=0.0), 'loc': Real(), 'scale': GreaterThan(lower_bound=0.0)}¶
- property concentration0¶
- property concentration1¶
- property high¶
- property loc¶
- property low¶
- property mean¶
- rsample(sample_shape=torch.Size([]))[source]¶
Generates a sample from Beta distribution and applies AffineTransform. Additionally clamps the output in order to avoid NaN and Inf values in the gradients.
- sample(sample_shape=torch.Size([]))[source]¶
Generates a sample from Beta distribution and applies AffineTransform. Additionally clamps the output in order to avoid NaN and Inf values in the gradients.
- property sample_size¶
- property scale¶
- property support¶
- property variance¶
AsymmetricLaplace¶
- class AsymmetricLaplace(loc, scale, asymmetry, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Asymmetric version of the
Laplace
distribution.To the left of
loc
this acts like an-Exponential(1/(asymmetry*scale))
; to the right ofloc
this acts like anExponential(asymmetry/scale)
. The density is continuous so the left and right densities atloc
agree.- Parameters
loc – Location parameter, i.e. the mode.
scale – Scale parameter = geometric mean of left and right scales.
asymmetry – Square of ratio of left to right scales.
- arg_constraints = {'asymmetry': GreaterThan(lower_bound=0.0), 'loc': Real(), 'scale': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
- property left_scale¶
- property mean¶
- property right_scale¶
- support = Real()¶
- property variance¶
AVFMultivariateNormal¶
- class AVFMultivariateNormal(loc, scale_tril, control_var)[source]¶
Bases:
pyro.distributions.torch.MultivariateNormal
Multivariate normal (Gaussian) distribution with transport equation inspired control variates (adaptive velocity fields).
A distribution over vectors in which all the elements have a joint Gaussian density.
- Parameters
loc (torch.Tensor) – D-dimensional mean vector.
scale_tril (torch.Tensor) – Cholesky of Covariance matrix; D x D matrix.
control_var (torch.Tensor) – 2 x L x D tensor that parameterizes the control variate; L is an arbitrary positive integer. This parameter needs to be learned (i.e. adapted) to achieve lower variance gradients. In a typical use case this parameter will be adapted concurrently with the loc and scale_tril that define the distribution.
Example usage:
control_var = torch.tensor(0.1 * torch.ones(2, 1, D), requires_grad=True) opt_cv = torch.optim.Adam([control_var], lr=0.1, betas=(0.5, 0.999)) for _ in range(1000): d = AVFMultivariateNormal(loc, scale_tril, control_var) z = d.rsample() cost = torch.pow(z, 2.0).sum() cost.backward() opt_cv.step() opt_cv.zero_grad()
- arg_constraints = {'control_var': Real(), 'loc': Real(), 'scale_tril': LowerTriangular()}¶
BetaBinomial¶
- class BetaBinomial(concentration1, concentration0, total_count=1, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Compound distribution comprising of a beta-binomial pair. The probability of success (
probs
for theBinomial
distribution) is unknown and randomly drawn from aBeta
distribution prior to a certain number of Bernoulli trials given bytotal_count
.- Parameters
concentration1 (float or torch.Tensor) – 1st concentration parameter (alpha) for the Beta distribution.
concentration0 (float or torch.Tensor) – 2nd concentration parameter (beta) for the Beta distribution.
total_count (float or torch.Tensor) – Number of Bernoulli trials.
- approx_log_prob_tol = 0.0¶
- arg_constraints = {'concentration0': GreaterThan(lower_bound=0.0), 'concentration1': GreaterThan(lower_bound=0.0), 'total_count': IntegerGreaterThan(lower_bound=0)}¶
- property concentration0¶
- property concentration1¶
- has_enumerate_support = True¶
- property mean¶
- property support¶
- property variance¶
CoalescentTimes¶
- class CoalescentTimes(leaf_times, rate=1.0, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Distribution over sorted coalescent times given irregular sampled
leaf_times
and constant population size.Sample values will be sorted sets of binary coalescent times. Each sample
value
will have cardinalityvalue.size(-1) = leaf_times.size(-1) - 1
, so that phylogenies are complete binary trees. This distribution can thus be batched over multiple samples of phylogenies given fixed (number of) leaf times, e.g. over phylogeny samples from BEAST or MrBayes.References
- [1] J.F.C. Kingman (1982)
“On the Genealogy of Large Populations” Journal of Applied Probability
- [2] J.F.C. Kingman (1982)
“The Coalescent” Stochastic Processes and their Applications
- Parameters
leaf_times (torch.Tensor) – Vector of times of sampling events, i.e. leaf nodes in the phylogeny. These can be arbitrary real numbers with arbitrary order and duplicates.
rate (torch.Tensor) – Base coalescent rate (pairwise rate of coalescence) under a constant population size model. Defaults to 1.
- arg_constraints = {'leaf_times': Real(), 'rate': GreaterThan(lower_bound=0.0)}¶
- property support¶
CoalescentTimesWithRate¶
- class CoalescentTimesWithRate(leaf_times, rate_grid, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Distribution over coalescent times given irregular sampled
leaf_times
and piecewise constant coalescent rates defined on a regular time grid.This assumes a piecewise constant base coalescent rate specified on time intervals
(-inf,1]
,[1,2]
, …,[T-1,inf)
, whereT = rate_grid.size(-1)
. Leaves may be sampled at arbitrary real times, but are commonly sampled in the interval[0, T]
.Sample values will be sorted sets of binary coalescent times. Each sample
value
will have cardinalityvalue.size(-1) = leaf_times.size(-1) - 1
, so that phylogenies are complete binary trees. This distribution can thus be batched over multiple samples of phylogenies given fixed (number of) leaf times, e.g. over phylogeny samples from BEAST or MrBayes.This distribution implements
log_prob()
but not.sample()
.See also
CoalescentRateLikelihood
.References
- [1] J.F.C. Kingman (1982)
“On the Genealogy of Large Populations” Journal of Applied Probability
- [2] J.F.C. Kingman (1982)
“The Coalescent” Stochastic Processes and their Applications
- [3] A. Popinga, T. Vaughan, T. Statler, A.J. Drummond (2014)
“Inferring epidemiological dynamics with Bayesian coalescent inference: The merits of deterministic and stochastic models” https://arxiv.org/pdf/1407.1792.pdf
- Parameters
leaf_times (torch.Tensor) – Tensor of times of sampling events, i.e. leaf nodes in the phylogeny. These can be arbitrary real numbers with arbitrary order and duplicates.
rate_grid (torch.Tensor) – Tensor of base coalescent rates (pairwise rate of coalescence). For example in a simple SIR model this might be
beta S / I
. The rightmost dimension is time, and this tensor represents a (batch of) rates that are piecewise constant in time.
- arg_constraints = {'leaf_times': Real(), 'rate_grid': GreaterThan(lower_bound=0.0)}¶
- property duration¶
- log_prob(value)[source]¶
Computes likelihood as in equations 7-8 of [3].
This has time complexity
O(T + S N log(N))
whereT
is the number of time steps,N
is the number of leaves, andS = sample_shape.numel()
is the number of samples ofvalue
.- Parameters
value (torch.Tensor) – A tensor of coalescent times. These denote sets of size
leaf_times.size(-1) - 1
along the trailing dimension and should be sorted along that dimension.- Returns
Likelihood
p(coal_times | leaf_times, rate_grid)
- Return type
- property support¶
ConditionalDistribution¶
ConditionalTransformedDistribution¶
Delta¶
- class Delta(v, log_density=0.0, event_dim=0, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Degenerate discrete distribution (a single point).
Discrete distribution that assigns probability one to the single element in its support. Delta distribution parameterized by a random choice should not be used with MCMC based inference, as doing so produces incorrect results.
- Parameters
v (torch.Tensor) – The single support element.
log_density (torch.Tensor) – An optional density for this Delta. This is useful to keep the class of
Delta
distributions closed under differentiable transformation.event_dim (int) – Optional event dimension, defaults to zero.
- arg_constraints = {'log_density': Real(), 'v': Dependent()}¶
- has_rsample = True¶
- property mean¶
- property support¶
- property variance¶
DirichletMultinomial¶
- class DirichletMultinomial(concentration, total_count=1, is_sparse=False, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Compound distribution comprising of a dirichlet-multinomial pair. The probability of classes (
probs
for theMultinomial
distribution) is unknown and randomly drawn from aDirichlet
distribution prior to a certain number of Categorical trials given bytotal_count
.- Parameters
concentration (float or torch.Tensor) – concentration parameter (alpha) for the Dirichlet distribution.
total_count (int or torch.Tensor) – number of Categorical trials.
is_sparse (bool) – Whether to assume value is mostly zero when computing
log_prob()
, which can speed up computation when data is sparse.
- arg_constraints = {'concentration': IndependentConstraint(GreaterThan(lower_bound=0.0), 1), 'total_count': IntegerGreaterThan(lower_bound=0)}¶
- property concentration¶
- property mean¶
- property support¶
- property variance¶
DiscreteHMM¶
- class DiscreteHMM(initial_logits, transition_logits, observation_dist, validate_args=None, duration=None)[source]¶
Bases:
pyro.distributions.hmm.HiddenMarkovModel
Hidden Markov Model with discrete latent state and arbitrary observation distribution.
This uses [1] to parallelize over time, achieving O(log(time)) parallel complexity for computing
log_prob()
,filter()
, andsample()
.The event_shape of this distribution includes time on the left:
event_shape = (num_steps,) + observation_dist.event_shape
This distribution supports any combination of homogeneous/heterogeneous time dependency of
transition_logits
andobservation_dist
. However, because time is included in this distribution’s event_shape, the homogeneous+homogeneous case will have a broadcastable event_shape withnum_steps = 1
, allowinglog_prob()
to work with arbitrary length data:# homogeneous + homogeneous case: event_shape = (1,) + observation_dist.event_shape
References:
- [1] Simo Sarkka, Angel F. Garcia-Fernandez (2019)
“Temporal Parallelization of Bayesian Filters and Smoothers” https://arxiv.org/pdf/1905.13002.pdf
- Parameters
initial_logits (Tensor) – A logits tensor for an initial categorical distribution over latent states. Should have rightmost size
state_dim
and be broadcastable tobatch_shape + (state_dim,)
.transition_logits (Tensor) – A logits tensor for transition conditional distributions between latent states. Should have rightmost shape
(state_dim, state_dim)
(old, new), and be broadcastable tobatch_shape + (num_steps, state_dim, state_dim)
.observation_dist (Distribution) – A conditional distribution of observed data conditioned on latent state. The
.batch_shape
should have rightmost sizestate_dim
and be broadcastable tobatch_shape + (num_steps, state_dim)
. The.event_shape
may be arbitrary.duration (int) – Optional size of the time axis
event_shape[0]
. This is required when sampling from homogeneous HMMs whose parameters are not expanded along the time axis.
- arg_constraints = {'initial_logits': Real(), 'transition_logits': Real()}¶
- filter(value)[source]¶
Compute posterior over final state given a sequence of observations.
- Parameters
value (Tensor) – A sequence of observations.
- Returns
A posterior distribution over latent states at the final time step.
result.logits
can then be used asinitial_logits
in a sequential Pyro model for prediction.- Return type
- property support¶
EmpiricalDistribution¶
- class Empirical(samples, log_weights, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Empirical distribution associated with the sampled data. Note that the shape requirement for log_weights is that its shape must match the leftmost shape of samples. Samples are aggregated along the
aggregation_dim
, which is the rightmost dim of log_weights.Example:
>>> emp_dist = Empirical(torch.randn(2, 3, 10), torch.ones(2, 3)) >>> emp_dist.batch_shape torch.Size([2]) >>> emp_dist.event_shape torch.Size([10])
>>> single_sample = emp_dist.sample() >>> single_sample.shape torch.Size([2, 10]) >>> batch_sample = emp_dist.sample((100,)) >>> batch_sample.shape torch.Size([100, 2, 10])
>>> emp_dist.log_prob(single_sample).shape torch.Size([2]) >>> # Vectorized samples cannot be scored by log_prob. >>> with pyro.validation_enabled(): ... emp_dist.log_prob(batch_sample).shape Traceback (most recent call last): ... ValueError: ``value.shape`` must be torch.Size([2, 10])
- Parameters
samples (torch.Tensor) – samples from the empirical distribution.
log_weights (torch.Tensor) – log weights (optional) corresponding to the samples.
- arg_constraints = {}¶
- enumerate_support(expand=True)[source]¶
See
pyro.distributions.torch_distribution.TorchDistribution.enumerate_support()
- property event_shape¶
See
pyro.distributions.torch_distribution.TorchDistribution.event_shape()
- has_enumerate_support = True¶
- log_prob(value)[source]¶
Returns the log of the probability mass function evaluated at
value
. Note that this currently only supports scoring values with emptysample_shape
.- Parameters
value (torch.Tensor) – scalar or tensor value to be scored.
- property log_weights¶
- property mean¶
See
pyro.distributions.torch_distribution.TorchDistribution.mean()
- sample(sample_shape=torch.Size([]))[source]¶
See
pyro.distributions.torch_distribution.TorchDistribution.sample()
- property sample_size¶
Number of samples that constitute the empirical distribution.
- Return int
number of samples collected.
- support = Real()¶
- property variance¶
See
pyro.distributions.torch_distribution.TorchDistribution.variance()
ExtendedBetaBinomial¶
- class ExtendedBetaBinomial(concentration1, concentration0, total_count=1, validate_args=None)[source]¶
Bases:
pyro.distributions.conjugate.BetaBinomial
EXPERIMENTAL
BetaBinomial
distribution extended to have logical support the entire integers and to allow arbitrary integertotal_count
. Numerical support is still the integer interval[0, total_count]
.- arg_constraints = {'concentration0': GreaterThan(lower_bound=0.0), 'concentration1': GreaterThan(lower_bound=0.0), 'total_count': Integer}¶
- support = Integer¶
ExtendedBinomial¶
- class ExtendedBinomial(total_count=1, probs=None, logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.Binomial
EXPERIMENTAL
Binomial
distribution extended to have logical support the entire integers and to allow arbitrary integertotal_count
. Numerical support is still the integer interval[0, total_count]
.- arg_constraints = {'logits': Real(), 'probs': Interval(lower_bound=0.0, upper_bound=1.0), 'total_count': Integer}¶
- support = Integer¶
FoldedDistribution¶
- class FoldedDistribution(base_dist, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.TransformedDistribution
Equivalent to
TransformedDistribution(base_dist, AbsTransform())
, but additionally supportslog_prob()
.- Parameters
base_dist (Distribution) – The distribution to reflect.
- support = GreaterThan(lower_bound=0.0)¶
GammaGaussianHMM¶
- class GammaGaussianHMM(scale_dist, initial_dist, transition_matrix, transition_dist, observation_matrix, observation_dist, validate_args=None, duration=None)[source]¶
Bases:
pyro.distributions.hmm.HiddenMarkovModel
Hidden Markov Model with the joint distribution of initial state, hidden state, and observed state is a
MultivariateStudentT
distribution along the line of references [2] and [3]. This adapts [1] to parallelize over time to achieve O(log(time)) parallel complexity.This GammaGaussianHMM class corresponds to the generative model:
s = Gamma(df/2, df/2).sample() z = scale(initial_dist, s).sample() x = [] for t in range(num_events): z = z @ transition_matrix + scale(transition_dist, s).sample() x.append(z @ observation_matrix + scale(observation_dist, s).sample())
where scale(mvn(loc, precision), s) := mvn(loc, s * precision).
The event_shape of this distribution includes time on the left:
event_shape = (num_steps,) + observation_dist.event_shape
This distribution supports any combination of homogeneous/heterogeneous time dependency of
transition_dist
andobservation_dist
. However, because time is included in this distribution’s event_shape, the homogeneous+homogeneous case will have a broadcastable event_shape withnum_steps = 1
, allowinglog_prob()
to work with arbitrary length data:event_shape = (1, obs_dim) # homogeneous + homogeneous case
References:
- [1] Simo Sarkka, Angel F. Garcia-Fernandez (2019)
“Temporal Parallelization of Bayesian Filters and Smoothers” https://arxiv.org/pdf/1905.13002.pdf
- [2] F. J. Giron and J. C. Rojano (1994)
“Bayesian Kalman filtering with elliptically contoured errors”
- [3] Filip Tronarp, Toni Karvonen, and Simo Sarkka (2019)
“Student’s t-filters for noise scale estimation” https://users.aalto.fi/~ssarkka/pub/SPL2019.pdf
- Variables
- Parameters
scale_dist (Gamma) – Prior of the mixing distribution.
initial_dist (MultivariateNormal) – A distribution with unit scale mixing over initial states. This should have batch_shape broadcastable to
self.batch_shape
. This should have event_shape(hidden_dim,)
.transition_matrix (Tensor) – A linear transformation of hidden state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, hidden_dim)
where the rightmost dims are ordered(old, new)
.transition_dist (MultivariateNormal) – A process noise distribution with unit scale mixing. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(hidden_dim,)
.observation_matrix (Tensor) – A linear transformation from hidden to observed state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, obs_dim)
.observation_dist (MultivariateNormal) – An observation noise distribution with unit scale mixing. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(obs_dim,)
.duration (int) – Optional size of the time axis
event_shape[0]
. This is required when sampling from homogeneous HMMs whose parameters are not expanded along the time axis.
- arg_constraints = {}¶
- filter(value)[source]¶
Compute posteriors over the multiplier and the final state given a sequence of observations. The posterior is a pair of Gamma and MultivariateNormal distributions (i.e. a GammaGaussian instance).
- Parameters
value (Tensor) – A sequence of observations.
- Returns
A pair of posterior distributions over the mixing and the latent state at the final time step.
- Return type
a tuple of ~pyro.distributions.Gamma and ~pyro.distributions.MultivariateNormal
- support = IndependentConstraint(Real(), 2)¶
GammaPoisson¶
- class GammaPoisson(concentration, rate, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Compound distribution comprising of a gamma-poisson pair, also referred to as a gamma-poisson mixture. The
rate
parameter for thePoisson
distribution is unknown and randomly drawn from aGamma
distribution.Note
This can be treated as an alternate parametrization of the
NegativeBinomial
(total_count
,probs
) distribution, with concentration = total_count and rate = (1 - probs) / probs.- Parameters
concentration (float or torch.Tensor) – shape parameter (alpha) of the Gamma distribution.
rate (float or torch.Tensor) – rate parameter (beta) for the Gamma distribution.
- arg_constraints = {'concentration': GreaterThan(lower_bound=0.0), 'rate': GreaterThan(lower_bound=0.0)}¶
- property concentration¶
- property mean¶
- property rate¶
- support = IntegerGreaterThan(lower_bound=0)¶
- property variance¶
GaussianHMM¶
- class GaussianHMM(initial_dist, transition_matrix, transition_dist, observation_matrix, observation_dist, validate_args=None, duration=None)[source]¶
Bases:
pyro.distributions.hmm.HiddenMarkovModel
Hidden Markov Model with Gaussians for initial, transition, and observation distributions. This adapts [1] to parallelize over time to achieve O(log(time)) parallel complexity, however it differs in that it tracks the log normalizer to ensure
log_prob()
is differentiable.This corresponds to the generative model:
z = initial_distribution.sample() x = [] for t in range(num_events): z = z @ transition_matrix + transition_dist.sample() x.append(z @ observation_matrix + observation_dist.sample())
The event_shape of this distribution includes time on the left:
event_shape = (num_steps,) + observation_dist.event_shape
This distribution supports any combination of homogeneous/heterogeneous time dependency of
transition_dist
andobservation_dist
. However, because time is included in this distribution’s event_shape, the homogeneous+homogeneous case will have a broadcastable event_shape withnum_steps = 1
, allowinglog_prob()
to work with arbitrary length data:event_shape = (1, obs_dim) # homogeneous + homogeneous case
References:
- [1] Simo Sarkka, Angel F. Garcia-Fernandez (2019)
“Temporal Parallelization of Bayesian Filters and Smoothers” https://arxiv.org/pdf/1905.13002.pdf
- Variables
- Parameters
initial_dist (MultivariateNormal) – A distribution over initial states. This should have batch_shape broadcastable to
self.batch_shape
. This should have event_shape(hidden_dim,)
.transition_matrix (Tensor) – A linear transformation of hidden state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, hidden_dim)
where the rightmost dims are ordered(old, new)
.transition_dist (MultivariateNormal) – A process noise distribution. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(hidden_dim,)
.observation_matrix (Tensor) – A linear transformation from hidden to observed state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, obs_dim)
.observation_dist (MultivariateNormal or Normal) – An observation noise distribution. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(obs_dim,)
.duration (int) – Optional size of the time axis
event_shape[0]
. This is required when sampling from homogeneous HMMs whose parameters are not expanded along the time axis.
- arg_constraints = {}¶
- conjugate_update(other)[source]¶
EXPERIMENTAL Creates an updated
GaussianHMM
fusing information from another compatible distribution.This should satisfy:
fg, log_normalizer = f.conjugate_update(g) assert f.log_prob(x) + g.log_prob(x) == fg.log_prob(x) + log_normalizer
- Parameters
other (MultivariateNormal or Normal) – A distribution representing
p(data|self.probs)
but normalized overself.probs
rather thandata
.- Returns
a pair
(updated,log_normalizer)
whereupdated
is an updatedGaussianHMM
, andlog_normalizer
is aTensor
representing the normalization factor.
- filter(value)[source]¶
Compute posterior over final state given a sequence of observations.
- Parameters
value (Tensor) – A sequence of observations.
- Returns
A posterior distribution over latent states at the final time step.
result
can then be used asinitial_dist
in a sequential Pyro model for prediction.- Return type
- has_rsample = True¶
- prefix_condition(data)[source]¶
EXPERIMENTAL Given self has
event_shape == (t+f, d)
and datax
of shapebatch_shape + (t, d)
, compute a conditional distribution of event_shape(f, d)
. Typicallyt
is the number of training time steps,f
is the number of forecast time steps, andd
is the data dimension.- Parameters
data (Tensor) – data of dimension at least 2.
- rsample_posterior(value, sample_shape=torch.Size([]))[source]¶
EXPERIMENTAL Sample from the latent state conditioned on observation.
- support = IndependentConstraint(Real(), 2)¶
GaussianMRF¶
- class GaussianMRF(initial_dist, transition_dist, observation_dist, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Temporal Markov Random Field with Gaussian factors for initial, transition, and observation distributions. This adapts [1] to parallelize over time to achieve O(log(time)) parallel complexity, however it differs in that it tracks the log normalizer to ensure
log_prob()
is differentiable.The event_shape of this distribution includes time on the left:
event_shape = (num_steps,) + observation_dist.event_shape
This distribution supports any combination of homogeneous/heterogeneous time dependency of
transition_dist
andobservation_dist
. However, because time is included in this distribution’s event_shape, the homogeneous+homogeneous case will have a broadcastable event_shape withnum_steps = 1
, allowinglog_prob()
to work with arbitrary length data:event_shape = (1, obs_dim) # homogeneous + homogeneous case
References:
- [1] Simo Sarkka, Angel F. Garcia-Fernandez (2019)
“Temporal Parallelization of Bayesian Filters and Smoothers” https://arxiv.org/pdf/1905.13002.pdf
- Variables
- Parameters
initial_dist (MultivariateNormal) – A distribution over initial states. This should have batch_shape broadcastable to
self.batch_shape
. This should have event_shape(hidden_dim,)
.transition_dist (MultivariateNormal) – A joint distribution factor over a pair of successive time steps. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(hidden_dim + hidden_dim,)
(old+new).observation_dist (MultivariateNormal) – A joint distribution factor over a hidden and an observed state. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(hidden_dim + obs_dim,)
.
- arg_constraints = {}¶
- property support¶
GaussianScaleMixture¶
- class GaussianScaleMixture(coord_scale, component_logits, component_scale)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Mixture of Normal distributions with zero mean and diagonal covariance matrices.
That is, this distribution is a mixture with K components, where each component distribution is a D-dimensional Normal distribution with zero mean and a D-dimensional diagonal covariance matrix. The K different covariance matrices are controlled by the parameters coord_scale and component_scale. That is, the covariance matrix of the k’th component is given by
Sigma_ii = (component_scale_k * coord_scale_i) ** 2 (i = 1, …, D)
where component_scale_k is a positive scale factor and coord_scale_i are positive scale parameters shared between all K components. The mixture weights are controlled by a K-dimensional vector of softmax logits, component_logits. This distribution implements pathwise derivatives for samples from the distribution. This distribution does not currently support batched parameters.
See reference [1] for details on the implementations of the pathwise derivative. Please consider citing this reference if you use the pathwise derivative in your research.
[1] Pathwise Derivatives for Multivariate Distributions, Martin Jankowiak & Theofanis Karaletsos. arXiv:1806.01856
Note that this distribution supports both even and odd dimensions, but the former should be more a bit higher precision, since it doesn’t use any erfs in the backward call. Also note that this distribution does not support D = 1.
- Parameters
coord_scale (torch.tensor) – D-dimensional vector of scales
component_logits (torch.tensor) – K-dimensional vector of logits
component_scale (torch.tensor) – K-dimensional vector of scale multipliers
- arg_constraints = {'component_logits': Real(), 'component_scale': GreaterThan(lower_bound=0.0), 'coord_scale': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
GroupedNormalNormal¶
- class GroupedNormalNormal(prior_loc, prior_scale, obs_scale, group_idx, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
This likelihood, which operates on groups of real-valued scalar observations, is obtained by integrating out a latent mean for each group. Both the prior on each latent mean as well as the observation likelihood for each data point are univariate Normal distributions. The prior means are controlled by prior_loc and prior_scale. The observation noise of the Normal likelihood is controlled by obs_scale, which is allowed to vary from observation to observation. The tensor of indices group_idx connects each observation to one of the groups specified by prior_loc and prior_scale.
See e.g. Eqn. (55) in ref. [1] for relevant expressions in a simpler case with scalar obs_scale.
Example:
>>> num_groups = 3 >>> num_data = 4 >>> prior_loc = torch.randn(num_groups) >>> prior_scale = torch.rand(num_groups) >>> obs_scale = torch.rand(num_data) >>> group_idx = torch.tensor([1, 0, 2, 1]).long() >>> values = torch.randn(num_data) >>> gnn = GroupedNormalNormal(prior_loc, prior_scale, obs_scale, group_idx) >>> assert gnn.log_prob(values).shape == ()
References: [1] “Conjugate Bayesian analysis of the Gaussian distribution,” Kevin P. Murphy.
- Parameters
prior_loc (torch.Tensor) – Tensor of shape (num_groups,) specifying the prior mean of the latent of each group.
prior_scale (torch.Tensor) – Tensor of shape (num_groups,) specifying the prior scale of the latent of each group.
obs_scale (torch.Tensor) – Tensor of shape (num_data,) specifying the scale of the observation noise of each observation.
group_idx (torch.LongTensor) – Tensor of indices of shape (num_data,) linking each observation to one of the num_groups groups that are specified in prior_loc and prior_scale.
- arg_constraints = {'obs_scale': GreaterThan(lower_bound=0.0), 'prior_loc': Real(), 'prior_scale': GreaterThan(lower_bound=0.0)}¶
- get_posterior(value)[source]¶
Get a pyro.distributions.Normal distribution that encodes the posterior distribution over the vector of latents specified by prior_loc and prior_scale conditioned on the observed data specified by value.
- support = Real()¶
ImproperUniform¶
- class ImproperUniform(support, batch_shape, event_shape)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Improper distribution with zero
log_prob()
and undefinedsample()
.This is useful for transforming a model from generative dag form to factor graph form for use in HMC. For example the following are equal in distribution:
# Version 1. a generative dag x = pyro.sample("x", Normal(0, 1)) y = pyro.sample("y", Normal(x, 1)) z = pyro.sample("z", Normal(y, 1)) # Version 2. a factor graph xyz = pyro.sample("xyz", ImproperUniform(constraints.real, (), (3,))) x, y, z = xyz.unbind(-1) pyro.sample("x", Normal(0, 1), obs=x) pyro.sample("y", Normal(x, 1), obs=y) pyro.sample("z", Normal(y, 1), obs=z)
Note this distribution errors when
sample()
is called. To create a similar distribution that instead samples from a specified distribution consider using.mask(False)
as in:xyz = dist.Normal(0, 1).expand([3]).to_event(1).mask(False)
- Parameters
support (Constraint) – The support of the distribution.
batch_shape (torch.Size) – The batch shape.
event_shape (torch.Size) – The event shape.
- arg_constraints = {}¶
- property support¶
IndependentHMM¶
- class IndependentHMM(base_dist)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Wrapper class to treat a batch of independent univariate HMMs as a single multivariate distribution. This converts distribution shapes as follows:
.batch_shape
.event_shape
base_dist
shape + (obs_dim,)
(duration, 1)
result
shape
(duration, obs_dim)
- Parameters
base_dist (HiddenMarkovModel) – A base hidden Markov model instance.
- arg_constraints = {}¶
- property duration¶
- property has_rsample¶
- property support¶
InverseGamma¶
- class InverseGamma(concentration, rate, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.TransformedDistribution
Creates an inverse-gamma distribution parameterized by concentration and rate.
X ~ Gamma(concentration, rate) Y = 1/X ~ InverseGamma(concentration, rate)
- Parameters
concentration (torch.Tensor) – the concentration parameter (i.e. alpha).
rate (torch.Tensor) – the rate parameter (i.e. beta).
- arg_constraints: Dict[str, torch.distributions.constraints.Constraint] = {'concentration': GreaterThan(lower_bound=0.0), 'rate': GreaterThan(lower_bound=0.0)}¶
- property concentration¶
- has_rsample = True¶
- property rate¶
- support = GreaterThan(lower_bound=0.0)¶
LinearHMM¶
- class LinearHMM(initial_dist, transition_matrix, transition_dist, observation_matrix, observation_dist, validate_args=None, duration=None)[source]¶
Bases:
pyro.distributions.hmm.HiddenMarkovModel
Hidden Markov Model with linear dynamics and observations and arbitrary noise for initial, transition, and observation distributions. Each of those distributions can be e.g.
MultivariateNormal
orIndependent
ofNormal
,StudentT
, orStable
. Additionally the observation distribution may be constrained, e.g.LogNormal
This corresponds to the generative model:
z = initial_distribution.sample() x = [] for t in range(num_events): z = z @ transition_matrix + transition_dist.sample() y = z @ observation_matrix + obs_base_dist.sample() x.append(obs_transform(y))
where
observation_dist
is split intoobs_base_dist
and an optionalobs_transform
(defaulting to the identity).This implements a reparameterized
rsample()
method but does not implement alog_prob()
method. Derived classes may implementlog_prob()
.Inference without
log_prob()
can be performed using either reparameterization withLinearHMMReparam
or likelihood-free algorithms such asEnergyDistance
. Note that while stable processes generally require a common shared stability parameter \(\alpha\) , this distribution and the above inference algorithms allow heterogeneous stability parameters.The event_shape of this distribution includes time on the left:
event_shape = (num_steps,) + observation_dist.event_shape
This distribution supports any combination of homogeneous/heterogeneous time dependency of
transition_dist
andobservation_dist
. However at least one of the distributions or matrices must be expanded to contain the time dimension.- Variables
- Parameters
initial_dist – A distribution over initial states. This should have batch_shape broadcastable to
self.batch_shape
. This should have event_shape(hidden_dim,)
.transition_matrix (Tensor) – A linear transformation of hidden state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, hidden_dim)
where the rightmost dims are ordered(old, new)
.transition_dist – A distribution over process noise. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(hidden_dim,)
.observation_matrix (Tensor) – A linear transformation from hidden to observed state. This should have shape broadcastable to
self.batch_shape + (num_steps, hidden_dim, obs_dim)
.observation_dist – A observation noise distribution. This should have batch_shape broadcastable to
self.batch_shape + (num_steps,)
. This should have event_shape(obs_dim,)
.duration (int) – Optional size of the time axis
event_shape[0]
. This is required when sampling from homogeneous HMMs whose parameters are not expanded along the time axis.
- arg_constraints = {}¶
- has_rsample = True¶
- property support¶
LKJ¶
- class LKJ(dim, concentration=1.0, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.TransformedDistribution
LKJ distribution for correlation matrices. The distribution is controlled by
concentration
parameter \(\eta\) to make the probability of the correlation matrix \(M\) propotional to \(\det(M)^{\eta - 1}\). Because of that, whenconcentration == 1
, we have a uniform distribution over correlation matrices.When
concentration > 1
, the distribution favors samples with large large determinent. This is useful when we know a priori that the underlying variables are not correlated. Whenconcentration < 1
, the distribution favors samples with small determinent. This is useful when we know a priori that some underlying variables are correlated.- Parameters
dimension (int) – dimension of the matrices
concentration (ndarray) – concentration/shape parameter of the distribution (often referred to as eta)
References
[1] Generating random correlation matrices based on vines and extended onion method, Daniel Lewandowski, Dorota Kurowicka, Harry Joe
- arg_constraints: Dict[str, torch.distributions.constraints.Constraint] = {'concentration': GreaterThan(lower_bound=0.0)}¶
- property mean¶
- support = CorrMatrix()¶
LKJCorrCholesky¶
LogNormalNegativeBinomial¶
- class LogNormalNegativeBinomial(total_count, logits, multiplicative_noise_scale, *, num_quad_points=8, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
A three-parameter generalization of the Negative Binomial distribution [1]. It can be understood as a continuous mixture of Negative Binomial distributions in which we inject Normally-distributed noise into the logits of the Negative Binomial distribution:
\[\begin{split}\begin{eqnarray} &\rm{LNNB}(y | \rm{total\_count}=\nu, \rm{logits}=\ell, \rm{multiplicative\_noise\_scale}=sigma) = \\ &\int d\epsilon \mathcal{N}(\epsilon | 0, \sigma) \rm{NB}(y | \rm{total\_count}=\nu, \rm{logits}=\ell + \epsilon) \end{eqnarray}\end{split}\]where \(y \ge 0\) is a non-negative integer. Thus while a Negative Binomial distribution can be formulated as a Poisson distribution with a Gamma-distributed rate, this distribution adds an additional level of variability by also modulating the rate by Log Normally-distributed multiplicative noise.
This distribution has a mean given by
\[\mathbb{E}[y] = \nu e^{\ell} = e^{\ell + \log \nu + \tfrac{1}{2}\sigma^2}\]and a variance given by
\[\rm{Var}[y] = \mathbb{E}[y] + \left( e^{\sigma^2} (1 + 1/\nu) - 1 \right) \left( \mathbb{E}[y] \right)^2\]Thus while a given mean and variance together uniquely characterize a Negative Binomial distribution, there is a one-dimensional family of Log Normal Negative Binomial distributions with a given mean and variance.
Note that in some applications it may be useful to parameterize the logits as
\[\ell = \ell^\prime - \log \nu - \tfrac{1}{2}\sigma^2\]so that the mean is given by \(\mathbb{E}[y] = e^{\ell^\prime}\) and does not depend on \(\nu\) and \(\sigma\), which serve to determine the higher moments.
References:
[1] “Lognormal and Gamma Mixed Negative Binomial Regression,” Mingyuan Zhou, Lingbo Li, David Dunson, and Lawrence Carin.
- Parameters
total_count (float or torch.Tensor) – non-negative number of negative Bernoulli trials. The variance decreases as total_count increases.
logits (torch.Tensor) – Event log-odds for probabilities of success for underlying Negative Binomial distribution.
multiplicative_noise_scale (torch.Tensor) – Controls the level of the injected Normal logit noise.
num_quad_points (int) – Number of quadrature points used to compute the (approximate) log_prob. Defaults to 8.
- arg_constraints = {'logits': Real(), 'multiplicative_noise_scale': GreaterThan(lower_bound=0.0), 'total_count': GreaterThanEq(lower_bound=0)}¶
- property mean¶
- support = IntegerGreaterThan(lower_bound=0)¶
- property variance¶
Logistic¶
- class Logistic(loc, scale, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Logistic distribution.
This is a smooth distribution with symmetric asymptotically exponential tails and a concave log density. For standard
loc=0
,scale=1
, the density is given by\[p(x) = \frac {e^{-x}} {(1 + e^{-x})^2}\]Like the
Laplace
density, this density has the heaviest possible tails (asymptotically) while still being log-convex. Unlike theLaplace
distribution, this distribution is infinitely differentiable everywhere, and is thus suitable for constructing Laplace approximations.- Parameters
loc – Location parameter.
scale – Scale parameter.
- arg_constraints = {'loc': Real(), 'scale': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
- property mean¶
- support = Real()¶
- property variance¶
MaskedDistribution¶
- class MaskedDistribution(base_dist, mask)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Masks a distribution by a boolean tensor that is broadcastable to the distribution’s
batch_shape
.In the special case
mask is False
, computation oflog_prob()
,score_parts()
, andkl_divergence()
is skipped, and constant zero values are returned instead.- Parameters
mask (torch.Tensor or bool) – A boolean or boolean-valued tensor.
- arg_constraints = {}¶
- property has_enumerate_support¶
- property has_rsample¶
- property mean¶
- property support¶
- property variance¶
MaskedMixture¶
- class MaskedMixture(mask, component0, component1, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
A masked deterministic mixture of two distributions.
This is useful when the mask is sampled from another distribution, possibly correlated across the batch. Often the mask can be marginalized out via enumeration.
Example:
change_point = pyro.sample("change_point", dist.Categorical(torch.ones(len(data) + 1)), infer={'enumerate': 'parallel'}) mask = torch.arange(len(data), dtype=torch.long) >= changepoint with pyro.plate("data", len(data)): pyro.sample("obs", MaskedMixture(mask, dist1, dist2), obs=data)
- Parameters
mask (torch.Tensor) – A boolean tensor toggling between
component0
andcomponent1
.component0 (pyro.distributions.TorchDistribution) – a distribution for batch elements
mask == False
.component1 (pyro.distributions.TorchDistribution) – a distribution for batch elements
mask == True
.
- arg_constraints = {}¶
- property has_rsample¶
- property mean¶
- property support¶
- property variance¶
MixtureOfDiagNormals¶
- class MixtureOfDiagNormals(locs, coord_scale, component_logits)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Mixture of Normal distributions with arbitrary means and arbitrary diagonal covariance matrices.
That is, this distribution is a mixture with K components, where each component distribution is a D-dimensional Normal distribution with a D-dimensional mean parameter and a D-dimensional diagonal covariance matrix. The K different component means are gathered into the K x D dimensional parameter locs and the K different scale parameters are gathered into the K x D dimensional parameter coord_scale. The mixture weights are controlled by a K-dimensional vector of softmax logits, component_logits. This distribution implements pathwise derivatives for samples from the distribution.
See reference [1] for details on the implementations of the pathwise derivative. Please consider citing this reference if you use the pathwise derivative in your research. Note that this distribution does not support dimension D = 1.
[1] Pathwise Derivatives for Multivariate Distributions, Martin Jankowiak & Theofanis Karaletsos. arXiv:1806.01856
- Parameters
locs (torch.Tensor) – K x D mean matrix
coord_scale (torch.Tensor) – K x D scale matrix
component_logits (torch.Tensor) – K-dimensional vector of softmax logits
- arg_constraints = {'component_logits': Real(), 'coord_scale': GreaterThan(lower_bound=0.0), 'locs': Real()}¶
- has_rsample = True¶
MultivariateStudentT¶
- class MultivariateStudentT(df, loc, scale_tril, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Creates a multivariate Student’s t-distribution parameterized by degree of freedom
df
, meanloc
and scalescale_tril
.- Parameters
- arg_constraints = {'df': GreaterThan(lower_bound=0.0), 'loc': IndependentConstraint(Real(), 1), 'scale_tril': LowerCholesky()}¶
- property covariance_matrix¶
- has_rsample = True¶
- property mean¶
- property precision_matrix¶
- property scale_tril¶
- support = IndependentConstraint(Real(), 1)¶
- property variance¶
NanMaskedNormal¶
- class NanMaskedNormal(loc, scale, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.Normal
Wrapper around
Normal
to allow partially observed data as specified by NAN elements inlog_prob()
; thelog_prob
of these elements will be zero. This is useful for likelihoods with missing data.Example:
from math import nan data = torch.tensor([0.5, 0.1, nan, 0.9]) with pyro.plate("data", len(data)): pyro.sample("obs", NanMaskedNormal(0, 1), obs=data)
- log_prob(value: torch.Tensor) torch.Tensor [source]¶
NanMaskedMultivariateNormal¶
- class NanMaskedMultivariateNormal(loc, covariance_matrix=None, precision_matrix=None, scale_tril=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.MultivariateNormal
Wrapper around
MultivariateNormal
to allow partially observed data as specified by NAN elements in the argument tolog_prob()
. Thelog_prob
of these events will marginalize over the NAN elements. This is useful for likelihoods with missing data.Example:
from math import nan data = torch.tensor([ [0.1, 0.2, 3.4], [0.5, 0.1, nan], [0.6, nan, nan], [nan, 0.5, nan], [nan, nan, nan], ]) with pyro.plate("data", len(data)): pyro.sample( "obs", NanMaskedMultivariateNormal(torch.zeros(3), torch.eye(3)), obs=data, )
- log_prob(value: torch.Tensor) torch.Tensor [source]¶
OMTMultivariateNormal¶
- class OMTMultivariateNormal(loc, scale_tril)[source]¶
Bases:
pyro.distributions.torch.MultivariateNormal
Multivariate normal (Gaussian) distribution with OMT gradients w.r.t. both parameters. Note the gradient computation w.r.t. the Cholesky factor has cost O(D^3), although the resulting gradient variance is generally expected to be lower.
A distribution over vectors in which all the elements have a joint Gaussian density.
- Parameters
loc (torch.Tensor) – Mean.
scale_tril (torch.Tensor) – Cholesky of Covariance matrix.
- arg_constraints = {'loc': Real(), 'scale_tril': LowerTriangular()}¶
OneOneMatching¶
- class OneOneMatching(logits, *, bp_iters=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Random perfect matching from
N
sources toN
destinations where each source matches exactly one destination and each destination matches exactly one source.Samples are represented as long tensors of shape
(N,)
taking values in{0,...,N-1}
and satisfying the above one-one constraint. The log probability of a samplev
is the sum of edge logits, up to the log partition functionlog Z
:\[\log p(v) = \sum_s \text{logits}[s, v[s]] - \log Z\]Exact computations are expensive. To enable tractable approximations, set a number of belief propagation iterations via the
bp_iters
argument. Thelog_partition_function()
andlog_prob()
methods use a Bethe approximation [1,2,3,4].References:
- [1] Michael Chertkov, Lukas Kroc, Massimo Vergassola (2008)
“Belief propagation and beyond for particle tracking” https://arxiv.org/pdf/0806.1199.pdf
- [2] Bert Huang, Tony Jebara (2009)
“Approximating the Permanent with Belief Propagation” https://arxiv.org/pdf/0908.1769.pdf
- [3] Pascal O. Vontobel (2012)
“The Bethe Permanent of a Non-Negative Matrix” https://arxiv.org/pdf/1107.4196.pdf
- [4] M Chertkov, AB Yedidia (2013)
“Approximating the permanent with fractional belief propagation” http://www.jmlr.org/papers/volume14/chertkov13a/chertkov13a.pdf
- Parameters
logits (Tensor) – An
(N, N)
-shaped tensor of edge logits.bp_iters (int) – Optional number of belief propagation iterations. If unspecified or
None
expensive exact algorithms will be used.
- arg_constraints = {'logits': Real()}¶
- has_enumerate_support = True¶
- property log_partition_function¶
- mode()[source]¶
Computes a maximum probability matching.
Note
This requires the lap package and runs on CPU.
- property support¶
OneTwoMatching¶
- class OneTwoMatching(logits, *, bp_iters=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Random matching from
2*N
sources toN
destinations where each source matches exactly one destination and each destination matches exactly two sources.Samples are represented as long tensors of shape
(2*N,)
taking values in{0,...,N-1}
and satisfying the above one-two constraint. The log probability of a samplev
is the sum of edge logits, up to the log partition functionlog Z
:\[\log p(v) = \sum_s \text{logits}[s, v[s]] - \log Z\]Exact computations are expensive. To enable tractable approximations, set a number of belief propagation iterations via the
bp_iters
argument. Thelog_partition_function()
andlog_prob()
methods use a Bethe approximation [1,2,3,4].References:
- [1] Michael Chertkov, Lukas Kroc, Massimo Vergassola (2008)
“Belief propagation and beyond for particle tracking” https://arxiv.org/pdf/0806.1199.pdf
- [2] Bert Huang, Tony Jebara (2009)
“Approximating the Permanent with Belief Propagation” https://arxiv.org/pdf/0908.1769.pdf
- [3] Pascal O. Vontobel (2012)
“The Bethe Permanent of a Non-Negative Matrix” https://arxiv.org/pdf/1107.4196.pdf
- [4] M Chertkov, AB Yedidia (2013)
“Approximating the permanent with fractional belief propagation” http://www.jmlr.org/papers/volume14/chertkov13a/chertkov13a.pdf
- Parameters
logits (Tensor) – An
(2 * N, N)
-shaped tensor of edge logits.bp_iters (int) – Optional number of belief propagation iterations. If unspecified or
None
expensive exact algorithms will be used.
- arg_constraints = {'logits': Real()}¶
- has_enumerate_support = True¶
- property log_partition_function¶
- mode()[source]¶
Computes a maximum probability matching.
Note
This requires the lap package and runs on CPU.
- property support¶
OrderedLogistic¶
- class OrderedLogistic(predictor, cutpoints, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.Categorical
Alternative parametrization of the distribution over a categorical variable.
Instead of the typical parametrization of a categorical variable in terms of the probability mass of the individual categories
p
, this provides an alternative that is useful in specifying ordered categorical models. This accepts a vector ofcutpoints
which are an ordered vector of real numbers denoting baseline cumulative log-odds of the individual categories, and a model vectorpredictor
which modifies the baselines for each sample individually.These cumulative log-odds are then transformed into a discrete cumulative probability distribution, that is finally differenced to return the probability mass matrix
p
that specifies the categorical distribution.- Parameters
predictor (Tensor) – A tensor of predictor variables of arbitrary shape. The output shape of non-batched samples from this distribution will be the same shape as
predictor
.cutpoints (Tensor) – A tensor of cutpoints that are used to determine the cumulative probability of each entry in
predictor
belonging to a given category. The first cutpoints.ndim-1 dimensions must be broadcastable topredictor
, and the -1 dimension is monotonically increasing.
- arg_constraints = {'cutpoints': OrderedVector(), 'predictor': Real()}¶
ProjectedNormal¶
- class ProjectedNormal(concentration, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Projected isotropic normal distribution of arbitrary dimension.
This distribution over directional data is qualitatively similar to the von Mises and von Mises-Fisher distributions, but permits tractable variational inference via reparametrized gradients.
To use this distribution with autoguides, use
poutine.reparam
with aProjectedNormalReparam
reparametrizer in the model, e.g.:@poutine.reparam(config={"direction": ProjectedNormalReparam()}) def model(): direction = pyro.sample("direction", ProjectedNormal(torch.zeros(3))) ...
or simply wrap in
MinimalReparam
orAutoReparam
, e.g.:@MinimalReparam() def model(): ...
Note
This implements
log_prob()
only for dimensions {2,3}.- [1] D. Hernandez-Stumpfhauser, F.J. Breidt, M.J. van der Woerd (2017)
“The General Projected Normal Distribution of Arbitrary Dimension: Modeling and Bayesian Inference” https://projecteuclid.org/euclid.ba/1453211962
- Parameters
concentration (torch.Tensor) – A combined location-and-concentration vector. The direction of this vector is the location, and its magnitude is the concentration.
- arg_constraints = {'concentration': IndependentConstraint(Real(), 1)}¶
- has_rsample = True¶
- property mean¶
Note this is the mean in the sense of a centroid in the submanifold that minimizes expected squared geodesic distance.
- property mode¶
- support = Sphere¶
RelaxedBernoulliStraightThrough¶
- class RelaxedBernoulliStraightThrough(temperature, probs=None, logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.RelaxedBernoulli
An implementation of
RelaxedBernoulli
with a straight-through gradient estimator.This distribution has the following properties:
The samples returned by the
rsample()
method are discrete/quantized.The
log_prob()
method returns the log probability of the relaxed/unquantized sample using the GumbelSoftmax distribution.In the backward pass the gradient of the sample with respect to the parameters of the distribution uses the relaxed/unquantized sample.
References:
- [1] The Concrete Distribution: A Continuous Relaxation of Discrete Random Variables,
Chris J. Maddison, Andriy Mnih, Yee Whye Teh
- [2] Categorical Reparameterization with Gumbel-Softmax,
Eric Jang, Shixiang Gu, Ben Poole
RelaxedOneHotCategoricalStraightThrough¶
- class RelaxedOneHotCategoricalStraightThrough(temperature, probs=None, logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch.RelaxedOneHotCategorical
An implementation of
RelaxedOneHotCategorical
with a straight-through gradient estimator.This distribution has the following properties:
The samples returned by the
rsample()
method are discrete/quantized.The
log_prob()
method returns the log probability of the relaxed/unquantized sample using the GumbelSoftmax distribution.In the backward pass the gradient of the sample with respect to the parameters of the distribution uses the relaxed/unquantized sample.
References:
- [1] The Concrete Distribution: A Continuous Relaxation of Discrete Random Variables,
Chris J. Maddison, Andriy Mnih, Yee Whye Teh
- [2] Categorical Reparameterization with Gumbel-Softmax,
Eric Jang, Shixiang Gu, Ben Poole
Rejector¶
- class Rejector(propose, log_prob_accept, log_scale, *, batch_shape=None, event_shape=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Rejection sampled distribution given an acceptance rate function.
- Parameters
propose (Distribution) – A proposal distribution that samples batched proposals via
propose()
.rsample()
supports asample_shape
arg only ifpropose()
supports asample_shape
arg.log_prob_accept (callable) – A callable that inputs a batch of proposals and returns a batch of log acceptance probabilities.
log_scale – Total log probability of acceptance.
- arg_constraints = {}¶
- has_rsample = True¶
SineBivariateVonMises¶
- class SineBivariateVonMises(phi_loc, psi_loc, phi_concentration, psi_concentration, correlation=None, weighted_correlation=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Unimodal distribution of two dependent angles on the 2-torus (S^1 ⨂ S^1) given by
\[C^{-1}\exp(\kappa_1\cos(x-\mu_1) + \kappa_2\cos(x_2 -\mu_2) + \rho\sin(x_1 - \mu_1)\sin(x_2 - \mu_2))\]and
\[C = (2\pi)^2 \sum_{i=0} {2i \choose i} \left(\frac{\rho^2}{4\kappa_1\kappa_2}\right)^i I_i(\kappa_1)I_i(\kappa_2),\]where I_i(cdot) is the modified bessel function of first kind, mu’s are the locations of the distribution, kappa’s are the concentration and rho gives the correlation between angles x_1 and x_2.
This distribution is a submodel of the Bivariate von Mises distribution, called the Sine Distribution [2] in directional statistics.
This distribution is helpful for modeling coupled angles such as torsion angles in peptide chains. To infer parameters, use
NUTS
orHMC
with priors that avoid parameterizations where the distribution becomes bimodal; see note below.Note
Sample efficiency drops as
\[\frac{\rho}{\kappa_1\kappa_2} \rightarrow 1\]because the distribution becomes increasingly bimodal. To avoid bimodality use the weighted_correlation parameter with a skew away from one (e.g., Beta(1,3)). The weighted_correlation should be in [0,1].
Note
The correlation and weighted_correlation params are mutually exclusive.
Note
In the context of
SVI
, this distribution can be used as a likelihood but not for latent variables.- ** References: **
Probabilistic model for two dependent circular variables Singh, H., Hnizdo, V., and Demchuck, E. (2002)
Protein Bioinformatics and Mixtures of Bivariate von Mises Distributions for Angular Data, Mardia, K. V, Taylor, T. C., and Subramaniam, G. (2007)
- Parameters
phi_loc (torch.Tensor) – location of first angle
psi_loc (torch.Tensor) – location of second angle
phi_concentration (torch.Tensor) – concentration of first angle
psi_concentration (torch.Tensor) – concentration of second angle
correlation (torch.Tensor) – correlation between the two angles
weighted_correlation (torch.Tensor) – set correlation to weighted_corr * sqrt(phi_conc*psi_conc) to avoid bimodality (see note). The weighted_correlation should be in [0,1].
- arg_constraints = {'correlation': Real(), 'phi_concentration': GreaterThan(lower_bound=0.0), 'phi_loc': Real(), 'psi_concentration': GreaterThan(lower_bound=0.0), 'psi_loc': Real()}¶
- max_sample_iter = 1000¶
- property mean¶
- property norm_const¶
- sample(sample_shape=torch.Size([]))[source]¶
- ** References: **
A New Unified Approach for the Simulation of aWide Class of Directional Distributions John T. Kent, Asaad M. Ganeiber & Kanti V. Mardia (2018)
- support = IndependentConstraint(Real(), 1)¶
SineSkewed¶
- class SineSkewed(base_dist: pyro.distributions.torch_distribution.TorchDistribution, skewness, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Sine Skewing [1] is a procedure for producing a distribution that breaks pointwise symmetry on a torus distribution. The new distribution is called the Sine Skewed X distribution, where X is the name of the (symmetric) base distribution.
Torus distributions are distributions with support on products of circles (i.e., ⨂^d S^1 where S^1=[-pi,pi) ). So, a 0-torus is a point, the 1-torus is a circle, and the 2-torus is commonly associated with the donut shape.
The Sine Skewed X distribution is parameterized by a weight parameter for each dimension of the event of X. For example with a von Mises distribution over a circle (1-torus), the Sine Skewed von Mises Distribution has one skew parameter. The skewness parameters can be inferred using
HMC
orNUTS
. For example, the following will produce a uniform prior over skewness for the 2-torus,:def model(obs): # Sine priors phi_loc = pyro.sample('phi_loc', VonMises(pi, 2.)) psi_loc = pyro.sample('psi_loc', VonMises(-pi / 2, 2.)) phi_conc = pyro.sample('phi_conc', Beta(halpha_phi, beta_prec_phi - halpha_phi)) psi_conc = pyro.sample('psi_conc', Beta(halpha_psi, beta_prec_psi - halpha_psi)) corr_scale = pyro.sample('corr_scale', Beta(2., 5.)) # SS prior skew_phi = pyro.sample('skew_phi', Uniform(-1., 1.)) psi_bound = 1 - skew_phi.abs() skew_psi = pyro.sample('skew_psi', Uniform(-1., 1.)) skewness = torch.stack((skew_phi, psi_bound * skew_psi), dim=-1) assert skewness.shape == (num_mix_comp, 2) with pyro.plate('obs_plate'): sine = SineBivariateVonMises(phi_loc=phi_loc, psi_loc=psi_loc, phi_concentration=1000 * phi_conc, psi_concentration=1000 * psi_conc, weighted_correlation=corr_scale) return pyro.sample('phi_psi', SineSkewed(sine, skewness), obs=obs)
To ensure the skewing does not alter the normalization constant of the (Sine Bivaraite von Mises) base distribution the skewness parameters are constraint. The constraint requires the sum of the absolute values of skewness to be less than or equal to one. So for the above snippet it must hold that:
skew_phi.abs()+skew_psi.abs() <= 1
We handle this in the prior by computing psi_bound and use it to scale skew_psi. We do not use psi_bound as:
skew_psi = pyro.sample('skew_psi', Uniform(-psi_bound, psi_bound))
as it would make the support for the Uniform distribution dynamic.
In the context of
SVI
, this distribution can freely be used as a likelihood, but use as latent variables it will lead to slow inference for 2 and higher dim toruses. This is because the base_dist cannot be reparameterized.Note
An event in the base distribution must be on a d-torus, so the event_shape must be (d,).
Note
For the skewness parameter, it must hold that the sum of the absolute value of its weights for an event must be less than or equal to one. See eq. 2.1 in [1].
- ** References: **
Sine-skewed toroidal distributions and their application in protein bioinformatics Ameijeiras-Alonso, J., Ley, C. (2019)
- Parameters
base_dist (torch.distributions.Distribution) – base density on a d-dimensional torus. Supported base distributions include: 1D
VonMises
,SineBivariateVonMises
, 1DProjectedNormal
, andUniform
(-pi, pi).skewness (torch.tensor) – skewness of the distribution.
- arg_constraints = {'skewness': IndependentConstraint(Interval(lower_bound=-1.0, upper_bound=1.0), 1)}¶
- support = IndependentConstraint(Real(), 1)¶
SkewLogistic¶
- class SkewLogistic(loc, scale, asymmetry=1.0, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Skewed generalization of the Logistic distribution (Type I in [1]).
This is a smooth distribution with asymptotically exponential tails and a concave log density. For standard
loc=0
,scale=1
,asymmetry=α
the density is given by\[p(x;\alpha) = \frac {\alpha e^{-x}} {(1 + e^{-x})^{\alpha+1}}\]Like the
AsymmetricLaplace
density, this density has the heaviest possible tails (asymptotically) while still being log-convex. Unlike theAsymmetricLaplace
distribution, this distribution is infinitely differentiable everywhere, and is thus suitable for constructing Laplace approximations.References
- [1] Generalized logistic distribution
https://en.wikipedia.org/wiki/Generalized_logistic_distribution
- Parameters
loc – Location parameter.
scale – Scale parameter.
asymmetry – Asymmetry parameter (positive). The distribution skews right when
asymmetry > 1
and left whenasymmetry < 1
. Defaults toasymmetry = 1
corresponding to the standard Logistic distribution.
- arg_constraints = {'asymmetry': GreaterThan(lower_bound=0.0), 'loc': Real(), 'scale': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
- support = Real()¶
SoftAsymmetricLaplace¶
- class SoftAsymmetricLaplace(loc, scale, asymmetry=1.0, softness=1.0, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Soft asymmetric version of the
Laplace
distribution.This has a smooth (infinitely differentiable) density with two asymmetric asymptotically exponential tails, one on the left and one on the right. In the limit of
softness → 0
, this converges in distribution to theAsymmetricLaplace
distribution.This is equivalent to the sum of three random variables
z - u + v
where:z ~ Normal(loc, scale * softness) u ~ Exponential(1 / (scale * asymmetry)) v ~ Exponential(asymetry / scale)
This is also equivalent the sum of two random variables
z + a
where:z ~ Normal(loc, scale * softness) a ~ AsymmetricLaplace(0, scale, asymmetry)
- Parameters
loc – Location parameter, i.e. the mode.
scale – Scale parameter = geometric mean of left and right scales.
asymmetry – Square of ratio of left to right scales. Defaults to 1.
softness – Scale parameter of the Gaussian smoother. Defaults to 1.
- arg_constraints = {'asymmetry': GreaterThan(lower_bound=0.0), 'loc': Real(), 'scale': GreaterThan(lower_bound=0.0), 'softness': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
- property left_scale¶
- property mean¶
- property right_scale¶
- property soft_scale¶
- support = Real()¶
- property variance¶
SoftLaplace¶
- class SoftLaplace(loc, scale, *, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Smooth distribution with Laplace-like tail behavior.
This distribution corresponds to the log-convex density:
z = (value - loc) / scale log_prob = log(2 / pi) - log(scale) - logaddexp(z, -z)
Like the Laplace density, this density has the heaviest possible tails (asymptotically) while still being log-convex. Unlike the Laplace distribution, this distribution is infinitely differentiable everywhere, and is thus suitable for constructing Laplace approximations.
- Parameters
loc – Location parameter.
scale – Scale parameter.
- arg_constraints = {'loc': Real(), 'scale': GreaterThan(lower_bound=0.0)}¶
- has_rsample = True¶
- property mean¶
- support = Real()¶
- property variance¶
SpanningTree¶
- class SpanningTree(edge_logits, sampler_options=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Distribution over spanning trees on a fixed number
V
of vertices.A tree is represented as
torch.LongTensor
edges
of shape(V-1,2)
satisfying the following properties:The edges constitute a tree, i.e. are connected and cycle free.
Each edge
(v1,v2) = edges[e]
is sorted, i.e.v1 < v2
.The entire tensor is sorted in colexicographic order.
Use
validate_edges()
to verify edges are correctly formed.The
edge_logits
tensor has one entry for each of theV*(V-1)//2
edges in the complete graph onV
vertices, where edges are each sorted and the edge order is colexicographic:(0,1), (0,2), (1,2), (0,3), (1,3), (2,3), (0,4), (1,4), (2,4), ...
This ordering corresponds to the size-independent pairing function:
k = v1 + v2 * (v2 - 1) // 2
where
k
is the rank of the edge(v1,v2)
in the complete graph. To convert a matrix of edge logits to the linear representation used here:assert my_matrix.shape == (V, V) i, j = make_complete_graph(V) edge_logits = my_matrix[i, j]
- Parameters
edge_logits (torch.Tensor) – A tensor of length
V*(V-1)//2
containing logits (aka negative energies) of all edges in the complete graph onV
vertices. See above comment for edge ordering.sampler_options (dict) – An optional dict of sampler options including:
mcmc_steps
defaulting to a single MCMC step (which is pretty good);initial_edges
defaulting to a cheap approximate sample;backend
one of “python” or “cpp”, defaulting to “python”.
- arg_constraints = {'edge_logits': Real()}¶
- property edge_mean¶
Computes marginal probabilities of each edge being active.
Note
This is similar to other distributions’
.mean()
method, but with a different shape because this distribution’s values are not encoded as binary matrices.- Returns
A symmetric square
(V,V)
-shaped matrix with values in[0,1]
denoting the marginal probability of each edge being in a sampled value.- Return type
Tensor
- enumerate_support(expand=True)[source]¶
This is implemented for trees with up to 6 vertices (and 5 edges).
- has_enumerate_support = True¶
- property log_partition_function¶
- property mode¶
The maximum weight spanning tree. :rtype: Tensor
- Type
returns
- sample(sample_shape=torch.Size([]))[source]¶
This sampler is implemented using MCMC run for a small number of steps after being initialized by a cheap approximate sampler. This sampler is approximate and cubic time. This is faster than the classic Aldous-Broder sampler [1,2], especially for graphs with large mixing time. Recent research [3,4] proposes samplers that run in sub-matrix-multiply time but are more complex to implement.
References
- [1] Generating random spanning trees
Andrei Broder (1989)
- [2] The Random Walk Construction of Uniform Spanning Trees and Uniform Labelled Trees,
David J. Aldous (1990)
- [3] Sampling Random Spanning Trees Faster than Matrix Multiplication,
David Durfee, Rasmus Kyng, John Peebles, Anup B. Rao, Sushant Sachdeva (2017) https://arxiv.org/abs/1611.07451
- [4] An almost-linear time algorithm for uniform random spanning tree generation,
Aaron Schild (2017) https://arxiv.org/abs/1711.06455
- support = IntegerGreaterThan(lower_bound=0)¶
- validate_edges(edges)[source]¶
Validates a batch of
edges
tensors, as returned bysample()
orenumerate_support()
or as input tolog_prob()
.- Parameters
edges (torch.LongTensor) – A batch of edges.
- Raises
ValueError
- Returns
None
Stable¶
- class Stable(stability, skew, scale=1.0, loc=0.0, coords='S0', validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Levy \(\alpha\)-stable distribution. See [1] for a review.
This uses Nolan’s parametrization [2] of the
loc
parameter, which is required for continuity and differentiability. This corresponds to the notation \(S^0_\alpha(\beta,\sigma,\mu_0)\) of [1], where \(\alpha\) = stability, \(\beta\) = skew, \(\sigma\) = scale, and \(\mu_0\) = loc. To instead use the S parameterization as in scipy, passcoords="S"
, but BEWARE this is discontinuous atstability=1
and has poor geometry for inference.This implements a reparametrized sampler
rsample()
, but does not implementlog_prob()
. Inference can be performed using either likelihood-free algorithms such asEnergyDistance
, or reparameterization via thereparam()
handler with one of the reparameterizersLatentStableReparam
,SymmetricStableReparam
, orStableReparam
e.g.:with poutine.reparam(config={"x": StableReparam()}): pyro.sample("x", Stable(stability, skew, scale, loc))
or simply wrap in
MinimalReparam
orAutoReparam
, e.g.:@MinimalReparam() def model(): ...
- [1] S. Borak, W. Hardle, R. Weron (2005).
Stable distributions. https://edoc.hu-berlin.de/bitstream/handle/18452/4526/8.pdf
- [2] J.P. Nolan (1997).
Numerical calculation of stable densities and distribution functions.
- [3] Rafal Weron (1996).
On the Chambers-Mallows-Stuck Method for Simulating Skewed Stable Random Variables.
- [4] J.P. Nolan (2017).
Stable Distributions: Models for Heavy Tailed Data. http://fs2.american.edu/jpnolan/www/stable/chap1.pdf
- Parameters
stability (Tensor) – Levy stability parameter \(\alpha\in(0,2]\) .
skew (Tensor) – Skewness \(\beta\in[-1,1]\) .
scale (Tensor) – Scale \(\sigma > 0\) . Defaults to 1.
loc (Tensor) – Location \(\mu_0\) when using Nolan’s S0 parametrization [2], or \(\mu\) when using the S parameterization. Defaults to 0.
coords (str) – Either “S0” (default) to use Nolan’s continuous S0 parametrization, or “S” to use the discontinuous parameterization.
- arg_constraints = {'loc': Real(), 'scale': GreaterThan(lower_bound=0.0), 'skew': Interval(lower_bound=-1, upper_bound=1), 'stability': Interval(lower_bound=0, upper_bound=2)}¶
- has_rsample = True¶
- property mean¶
- support = Real()¶
- property variance¶
TruncatedPolyaGamma¶
- class TruncatedPolyaGamma(prototype, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
This is a PolyaGamma(1, 0) distribution truncated to have finite support in the interval (0, 2.5). See [1] for details. As a consequence of the truncation the log_prob method is only accurate to about six decimal places. In addition the provided sampler is a rough approximation that is only meant to be used in contexts where sample accuracy is not important (e.g. in initialization). Broadly, this implementation is only intended for usage in cases where good approximations of the log_prob are sufficient, as is the case e.g. in HMC.
- Parameters
prototype (tensor) – A prototype tensor of arbitrary shape used to determine the dtype and device returned by sample and log_prob.
References
- [1] ‘Bayesian inference for logistic models using Polya-Gamma latent variables’
Nicholas G. Polson, James G. Scott, Jesse Windle.
- arg_constraints = {}¶
- has_rsample = False¶
- num_gamma_variates = 8¶
- num_log_prob_terms = 7¶
- support = Interval(lower_bound=0.0, upper_bound=2.5)¶
- truncation_point = 2.5¶
Unit¶
- class Unit(log_factor, *, has_rsample=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Trivial nonnormalized distribution representing the unit type.
The unit type has a single value with no data, i.e.
value.numel() == 0
.This is used for
pyro.factor()
statements.- arg_constraints = {'log_factor': Real()}¶
- support = Real()¶
VonMises3D¶
- class VonMises3D(concentration, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Spherical von Mises distribution.
This implementation combines the direction parameter and concentration parameter into a single combined parameter that contains both direction and magnitude. The
value
arg is represented in cartesian coordinates: it must be a normalized 3-vector that lies on the 2-sphere.See
VonMises
for a 2D polar coordinate cousin of this distribution. Seeprojected_normal
for a qualitatively similar distribution but implementing more functionality.Currently only
log_prob()
is implemented.- Parameters
concentration (torch.Tensor) – A combined location-and-concentration vector. The direction of this vector is the location, and its magnitude is the concentration.
- arg_constraints = {'concentration': Real()}¶
- support = Sphere¶
ZeroInflatedDistribution¶
- class ZeroInflatedDistribution(base_dist, *, gate=None, gate_logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.torch_distribution.TorchDistribution
Generic Zero Inflated distribution.
This can be used directly or can be used as a base class as e.g. for
ZeroInflatedPoisson
andZeroInflatedNegativeBinomial
.- Parameters
base_dist (TorchDistribution) – the base distribution.
gate (torch.Tensor) – probability of extra zeros given via a Bernoulli distribution.
gate_logits (torch.Tensor) – logits of extra zeros given via a Bernoulli distribution.
- arg_constraints = {'gate': Interval(lower_bound=0.0, upper_bound=1.0), 'gate_logits': Real()}¶
- property gate¶
- property gate_logits¶
- property mean¶
- property support¶
- property variance¶
ZeroInflatedNegativeBinomial¶
- class ZeroInflatedNegativeBinomial(total_count, *, probs=None, logits=None, gate=None, gate_logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.zero_inflated.ZeroInflatedDistribution
A Zero Inflated Negative Binomial distribution.
- Parameters
total_count (float or torch.Tensor) – non-negative number of negative Bernoulli trials.
probs (torch.Tensor) – Event probabilities of success in the half open interval [0, 1).
logits (torch.Tensor) – Event log-odds for probabilities of success.
gate (torch.Tensor) – probability of extra zeros.
gate_logits (torch.Tensor) – logits of extra zeros.
- arg_constraints = {'gate': Interval(lower_bound=0.0, upper_bound=1.0), 'gate_logits': Real(), 'logits': Real(), 'probs': HalfOpenInterval(lower_bound=0.0, upper_bound=1.0), 'total_count': GreaterThanEq(lower_bound=0)}¶
- property logits¶
- property probs¶
- support = IntegerGreaterThan(lower_bound=0)¶
- property total_count¶
ZeroInflatedPoisson¶
- class ZeroInflatedPoisson(rate, *, gate=None, gate_logits=None, validate_args=None)[source]¶
Bases:
pyro.distributions.zero_inflated.ZeroInflatedDistribution
A Zero Inflated Poisson distribution.
- Parameters
rate (torch.Tensor) – rate of poisson distribution.
gate (torch.Tensor) – probability of extra zeros.
gate_logits (torch.Tensor) – logits of extra zeros.
- arg_constraints = {'gate': Interval(lower_bound=0.0, upper_bound=1.0), 'gate_logits': Real(), 'rate': GreaterThan(lower_bound=0.0)}¶
- property rate¶
- support = IntegerGreaterThan(lower_bound=0)¶
Transforms¶
ConditionalTransform¶
CholeskyTransform¶
- class CholeskyTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Transform via the mapping \(y = safe_cholesky(x)\), where x is a positive definite matrix.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = LowerCholesky()¶
- domain: torch.distributions.constraints.Constraint = PositiveDefinite()¶
CorrMatrixCholeskyTransform¶
- class CorrMatrixCholeskyTransform(cache_size=0)[source]¶
Bases:
pyro.distributions.transforms.cholesky.CholeskyTransform
Transform via the mapping \(y = safe_cholesky(x)\), where x is a correlation matrix.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = CorrCholesky()¶
- domain: torch.distributions.constraints.Constraint = CorrMatrix()¶
DiscreteCosineTransform¶
- class DiscreteCosineTransform(dim=- 1, smooth=0.0, cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Discrete Cosine Transform of type-II.
This uses
dct()
andidct()
to compute orthonormal DCT and inverse DCT transforms. The jacobian is 1.- Parameters
dim (int) – Dimension along which to transform. Must be negative. This is an absolute dim counting from the right.
smooth (float) – Smoothing parameter. When 0, this transforms white noise to white noise; when 1 this transforms Brownian noise to to white noise; when -1 this transforms violet noise to white noise; etc. Any real number is allowed. https://en.wikipedia.org/wiki/Colors_of_noise.
- bijective = True¶
- property codomain¶
- property domain¶
ELUTransform¶
- class ELUTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Bijective transform via the mapping \(y = \text{ELU}(x)\).
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = GreaterThan(lower_bound=0.0)¶
- domain: torch.distributions.constraints.Constraint = Real()¶
- sign = 1¶
HaarTransform¶
- class HaarTransform(dim=- 1, flip=False, cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Discrete Haar transform.
This uses
haar_transform()
andinverse_haar_transform()
to compute (orthonormal) Haar and inverse Haar transforms. The jacobian is 1. For sequences with length T not a power of two, this implementation is equivalent to a block-structured Haar transform in which block sizes decrease by factors of one half from left to right.- Parameters
- bijective = True¶
- property codomain¶
- property domain¶
LeakyReLUTransform¶
- class LeakyReLUTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Bijective transform via the mapping \(y = \text{LeakyReLU}(x)\).
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = GreaterThan(lower_bound=0.0)¶
- domain: torch.distributions.constraints.Constraint = Real()¶
- sign = 1¶
LowerCholeskyAffine¶
- class LowerCholeskyAffine(loc, scale_tril, cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
A bijection of the form,
\(\mathbf{y} = \mathbf{L} \mathbf{x} + \mathbf{r}\)
where mathbf{L} is a lower triangular matrix and mathbf{r} is a vector.
- Parameters
loc (torch.tensor) – the fixed D-dimensional vector to shift the input by.
scale_tril (torch.tensor) – the D x D lower triangular matrix used in the transformation.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- log_abs_det_jacobian(x, y)[source]¶
Calculates the elementwise determinant of the log Jacobian, i.e. log(abs(dy/dx)).
- volume_preserving = False¶
Normalize¶
- class Normalize(p=2, cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Safely project a vector onto the sphere wrt the
p
norm. This avoids the singularity at zero by mapping to the vector[1, 0, 0, ..., 0]
.- bijective = False¶
- codomain: torch.distributions.constraints.Constraint = Sphere¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
OrderedTransform¶
- class OrderedTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Transforms a real vector into an ordered vector.
Specifically, enforces monotonically increasing order on the last dimension of a given tensor via the transformation \(y_0 = x_0\), \(y_i = \sum_{1 \le j \le i} \exp(x_i)\)
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = OrderedVector()¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
Permute¶
- class Permute(permutation, *, dim=- 1, cache_size=1)[source]¶
Bases:
torch.distributions.transforms.Transform
A bijection that reorders the input dimensions, that is, multiplies the input by a permutation matrix. This is useful in between
AffineAutoregressive
transforms to increase the flexibility of the resulting distribution and stabilize learning. Whilst not being an autoregressive transform, the log absolute determinate of the Jacobian is easily calculable as 0. Note that reordering the input dimension between two layers ofAffineAutoregressive
is not equivalent to reordering the dimension inside the MADE networks that those IAFs use; using aPermute
transform results in a distribution with more flexibility.Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> from pyro.distributions.transforms import AffineAutoregressive, Permute >>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> iaf1 = AffineAutoregressive(AutoRegressiveNN(10, [40])) >>> ff = Permute(torch.randperm(10, dtype=torch.long)) >>> iaf2 = AffineAutoregressive(AutoRegressiveNN(10, [40])) >>> flow_dist = dist.TransformedDistribution(base_dist, [iaf1, ff, iaf2]) >>> flow_dist.sample()
- Parameters
permutation (torch.LongTensor) – a permutation ordering that is applied to the inputs.
dim (int) – the tensor dimension to permute. This value must be negative and defines the event dim as abs(dim).
- bijective = True¶
- property codomain¶
- property domain¶
- property inv_permutation¶
- log_abs_det_jacobian(x, y)[source]¶
Calculates the elementwise determinant of the log Jacobian, i.e. log(abs([dy_0/dx_0, …, dy_{N-1}/dx_{N-1}])). Note that this type of transform is not autoregressive, so the log Jacobian is not the sum of the previous expression. However, it turns out it’s always 0 (since the determinant is -1 or +1), and so returning a vector of zeros works.
- volume_preserving = True¶
PositivePowerTransform¶
- class PositivePowerTransform(exponent, *, cache_size=0, validate_args=None)[source]¶
Bases:
torch.distributions.transforms.Transform
Transform via the mapping \(y=\operatorname{sign}(x)|x|^{\text{exponent}}\).
Whereas
PowerTransform
allows arbitraryexponent
and restricts domain and codomain to postive values, this class restrictsexponent > 0
and allows real domain and codomain.Warning
The Jacobian is typically zero or infinite at the origin.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = Real()¶
- domain: torch.distributions.constraints.Constraint = Real()¶
- sign = 1¶
SoftplusLowerCholeskyTransform¶
- class SoftplusLowerCholeskyTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Transform from unconstrained matrices to lower-triangular matrices with nonnegative diagonal entries. This is useful for parameterizing positive definite matrices in terms of their Cholesky factorization.
- codomain: torch.distributions.constraints.Constraint = LowerCholesky()¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 2)¶
SoftplusTransform¶
- class SoftplusTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Transform via the mapping \(\text{Softplus}(x) = \log(1 + \exp(x))\).
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = GreaterThan(lower_bound=0.0)¶
- domain: torch.distributions.constraints.Constraint = Real()¶
- sign = 1¶
UnitLowerCholeskyTransform¶
- class UnitLowerCholeskyTransform(cache_size=0)[source]¶
Bases:
torch.distributions.transforms.Transform
Transform from unconstrained matrices to lower-triangular matrices with all ones diagonals.
- codomain: torch.distributions.constraints.Constraint = UnitLowerCholesky()¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 2)¶
TransformModules¶
AffineAutoregressive¶
- class AffineAutoregressive(autoregressive_nn, log_scale_min_clip=- 5.0, log_scale_max_clip=3.0, sigmoid_bias=2.0, stable=False)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of the bijective transform of Inverse Autoregressive Flow (IAF), using by default Eq (10) from Kingma Et Al., 2016,
\(\mathbf{y} = \mu_t + \sigma_t\odot\mathbf{x}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, \(\mu_t,\sigma_t\) are calculated from an autoregressive network on \(\mathbf{x}\), and \(\sigma_t>0\).
If the stable keyword argument is set to True then the transformation used is,
\(\mathbf{y} = \sigma_t\odot\mathbf{x} + (1-\sigma_t)\odot\mu_t\)
where \(\sigma_t\) is restricted to \((0,1)\). This variant of IAF is claimed by the authors to be more numerically stable than one using Eq (10), although in practice it leads to a restriction on the distributions that can be represented, presumably since the input is restricted to rescaling by a number on \((0,1)\).
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = AffineAutoregressive(AutoRegressiveNN(10, [40])) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse of the Bijector is required when, e.g., scoring the log density of a sample with
TransformedDistribution
. This implementation caches the inverse of the Bijector when its forward operation is called, e.g., when sampling fromTransformedDistribution
. However, if the cached value isn’t available, either because it was overwritten during sampling a new value or an arbitrary value is being scored, it will calculate it manually. Note that this is an operation that scales as O(D) where D is the input dimension, and so should be avoided for large dimensional uses. So in general, it is cheap to sample from IAF and score a value that was sampled by IAF, but expensive to score an arbitrary value.- Parameters
autoregressive_nn (callable) – an autoregressive neural network whose forward call returns a real-valued mean and logit-scale as a tuple
log_scale_min_clip (float) – The minimum value for clipping the log(scale) from the autoregressive NN
log_scale_max_clip (float) – The maximum value for clipping the log(scale) from the autoregressive NN
sigmoid_bias (float) – A term to add the logit of the input when using the stable tranform.
stable (bool) – When true, uses the alternative “stable” version of the transform (see above).
References:
[1] Diederik P. Kingma, Tim Salimans, Rafal Jozefowicz, Xi Chen, Ilya Sutskever, Max Welling. Improving Variational Inference with Inverse Autoregressive Flow. [arXiv:1606.04934]
[2] Danilo Jimenez Rezende, Shakir Mohamed. Variational Inference with Normalizing Flows. [arXiv:1505.05770]
[3] Mathieu Germain, Karol Gregor, Iain Murray, Hugo Larochelle. MADE: Masked Autoencoder for Distribution Estimation. [arXiv:1502.03509]
- autoregressive = True¶
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- sign = 1¶
AffineCoupling¶
- class AffineCoupling(split_dim, hypernet, *, dim=- 1, log_scale_min_clip=- 5.0, log_scale_max_clip=3.0)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of the affine coupling layer of RealNVP (Dinh et al., 2017) that uses the bijective transform,
\(\mathbf{y}_{1:d} = \mathbf{x}_{1:d}\) \(\mathbf{y}_{(d+1):D} = \mu + \sigma\odot\mathbf{x}_{(d+1):D}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, e.g. \(\mathbf{x}_{1:d}\) represents the first \(d\) elements of the inputs, and \(\mu,\sigma\) are shift and translation parameters calculated as the output of a function inputting only \(\mathbf{x}_{1:d}\).
That is, the first \(d\) components remain unchanged, and the subsequent \(D-d\) are shifted and translated by a function of the previous components.
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn import DenseNN >>> input_dim = 10 >>> split_dim = 6 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim-split_dim, input_dim-split_dim] >>> hypernet = DenseNN(split_dim, [10*input_dim], param_dims) >>> transform = AffineCoupling(split_dim, hypernet) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse of the Bijector is required when, e.g., scoring the log density of a sample with
TransformedDistribution
. This implementation caches the inverse of the Bijector when its forward operation is called, e.g., when sampling fromTransformedDistribution
. However, if the cached value isn’t available, either because it was overwritten during sampling a new value or an arbitary value is being scored, it will calculate it manually.This is an operation that scales as O(1), i.e. constant in the input dimension. So in general, it is cheap to sample and score (an arbitrary value) from
AffineCoupling
.- Parameters
split_dim (int) – Zero-indexed dimension \(d\) upon which to perform input/ output split for transformation.
hypernet (callable) – a neural network whose forward call returns a real-valued mean and logit-scale as a tuple. The input should have final dimension split_dim and the output final dimension input_dim-split_dim for each member of the tuple.
dim (int) – the tensor dimension on which to split. This value must be negative and defines the event dim as abs(dim).
log_scale_min_clip (float) – The minimum value for clipping the log(scale) from the autoregressive NN
log_scale_max_clip (float) – The maximum value for clipping the log(scale) from the autoregressive NN
References:
[1] Laurent Dinh, Jascha Sohl-Dickstein, and Samy Bengio. Density estimation using Real NVP. ICLR 2017.
- bijective = True¶
- property codomain¶
- property domain¶
BatchNorm¶
- class BatchNorm(input_dim, momentum=0.1, epsilon=1e-05)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
A type of batch normalization that can be used to stabilize training in normalizing flows. The inverse operation is defined as
\(x = (y - \hat{\mu}) \oslash \sqrt{\hat{\sigma^2}} \otimes \gamma + \beta\)
that is, the standard batch norm equation, where \(x\) is the input, \(y\) is the output, \(\gamma,\beta\) are learnable parameters, and \(\hat{\mu}\)/\(\hat{\sigma^2}\) are smoothed running averages of the sample mean and variance, respectively. The constraint \(\gamma>0\) is enforced to ease calculation of the log-det-Jacobian term.
This is an element-wise transform, and when applied to a vector, learns two parameters (\(\gamma,\beta\)) for each dimension of the input.
When the module is set to training mode, the moving averages of the sample mean and variance are updated every time the inverse operator is called, e.g., when a normalizing flow scores a minibatch with the log_prob method.
Also, when the module is set to training mode, the sample mean and variance on the current minibatch are used in place of the smoothed averages, \(\hat{\mu}\) and \(\hat{\sigma^2}\), for the inverse operator. For this reason it is not the case that \(x=g(g^{-1}(x))\) during training, i.e., that the inverse operation is the inverse of the forward one.
Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> from pyro.distributions.transforms import AffineAutoregressive >>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> iafs = [AffineAutoregressive(AutoRegressiveNN(10, [40])) for _ in range(2)] >>> bn = BatchNorm(10) >>> flow_dist = dist.TransformedDistribution(base_dist, [iafs[0], bn, iafs[1]]) >>> flow_dist.sample()
- Parameters
References:
[1] Sergey Ioffe and Christian Szegedy. Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift. In International Conference on Machine Learning, 2015. https://arxiv.org/abs/1502.03167
[2] Laurent Dinh, Jascha Sohl-Dickstein, and Samy Bengio. Density Estimation using Real NVP. In International Conference on Learning Representations, 2017. https://arxiv.org/abs/1605.08803
[3] George Papamakarios, Theo Pavlakou, and Iain Murray. Masked Autoregressive Flow for Density Estimation. In Neural Information Processing Systems, 2017. https://arxiv.org/abs/1705.07057
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = Real()¶
- property constrained_gamma¶
- domain: torch.distributions.constraints.Constraint = Real()¶
BlockAutoregressive¶
- class BlockAutoregressive(input_dim, hidden_factors=[8, 8], activation='tanh', residual=None)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of Block Neural Autoregressive Flow (block-NAF) (De Cao et al., 2019) bijective transform. Block-NAF uses a similar transformation to deep dense NAF, building the autoregressive NN into the structure of the transform, in a sense.
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> naf = BlockAutoregressive(input_dim=10) >>> pyro.module("my_naf", naf) >>> naf_dist = dist.TransformedDistribution(base_dist, [naf]) >>> naf_dist.sample()
The inverse operation is not implemented. This would require numerical inversion, e.g., using a root finding method - a possibility for a future implementation.
- Parameters
input_dim (int) – The dimensionality of the input and output variables.
hidden_factors (list) – Hidden layer i has hidden_factors[i] hidden units per input dimension. This corresponds to both \(a\) and \(b\) in De Cao et al. (2019). The elements of hidden_factors must be integers.
activation (string) – Activation function to use. One of ‘ELU’, ‘LeakyReLU’, ‘sigmoid’, or ‘tanh’.
residual (string) – Type of residual connections to use. Choices are “None”, “normal” for \(\mathbf{y}+f(\mathbf{y})\), and “gated” for \(\alpha\mathbf{y} + (1 - \alpha\mathbf{y})\) for learnable parameter \(\alpha\).
References:
[1] Nicola De Cao, Ivan Titov, Wilker Aziz. Block Neural Autoregressive Flow. [arXiv:1904.04676]
- autoregressive = True¶
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
ConditionalAffineAutoregressive¶
- class ConditionalAffineAutoregressive(autoregressive_nn, **kwargs)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
An implementation of the bijective transform of Inverse Autoregressive Flow (IAF) that conditions on an additional context variable and uses, by default, Eq (10) from Kingma Et Al., 2016,
\(\mathbf{y} = \mu_t + \sigma_t\odot\mathbf{x}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, \(\mu_t,\sigma_t\) are calculated from an autoregressive network on \(\mathbf{x}\) and context \(\mathbf{z}\in\mathbb{R}^M\), and \(\sigma_t>0\).
If the stable keyword argument is set to True then the transformation used is,
\(\mathbf{y} = \sigma_t\odot\mathbf{x} + (1-\sigma_t)\odot\mu_t\)
where \(\sigma_t\) is restricted to \((0,1)\). This variant of IAF is claimed by the authors to be more numerically stable than one using Eq (10), although in practice it leads to a restriction on the distributions that can be represented, presumably since the input is restricted to rescaling by a number on \((0,1)\).
Together with
ConditionalTransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn import ConditionalAutoRegressiveNN >>> input_dim = 10 >>> context_dim = 4 >>> batch_size = 3 >>> hidden_dims = [10*input_dim, 10*input_dim] >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> hypernet = ConditionalAutoRegressiveNN(input_dim, context_dim, hidden_dims) >>> transform = ConditionalAffineAutoregressive(hypernet) >>> pyro.module("my_transform", transform) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
The inverse of the Bijector is required when, e.g., scoring the log density of a sample with
TransformedDistribution
. This implementation caches the inverse of the Bijector when its forward operation is called, e.g., when sampling fromTransformedDistribution
. However, if the cached value isn’t available, either because it was overwritten during sampling a new value or an arbitrary value is being scored, it will calculate it manually. Note that this is an operation that scales as O(D) where D is the input dimension, and so should be avoided for large dimensional uses. So in general, it is cheap to sample from IAF and score a value that was sampled by IAF, but expensive to score an arbitrary value.- Parameters
autoregressive_nn (nn.Module) – an autoregressive neural network whose forward call returns a real-valued mean and logit-scale as a tuple
log_scale_min_clip (float) – The minimum value for clipping the log(scale) from the autoregressive NN
log_scale_max_clip (float) – The maximum value for clipping the log(scale) from the autoregressive NN
sigmoid_bias (float) – A term to add the logit of the input when using the stable tranform.
stable (bool) – When true, uses the alternative “stable” version of the transform (see above).
References:
[1] Diederik P. Kingma, Tim Salimans, Rafal Jozefowicz, Xi Chen, Ilya Sutskever, Max Welling. Improving Variational Inference with Inverse Autoregressive Flow. [arXiv:1606.04934]
[2] Danilo Jimenez Rezende, Shakir Mohamed. Variational Inference with Normalizing Flows. [arXiv:1505.05770]
[3] Mathieu Germain, Karol Gregor, Iain Murray, Hugo Larochelle. MADE: Masked Autoencoder for Distribution Estimation. [arXiv:1502.03509]
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
Conditions on a context variable, returning a non-conditional transform of of type
AffineAutoregressive
.
- domain = IndependentConstraint(Real(), 1)¶
ConditionalAffineCoupling¶
- class ConditionalAffineCoupling(split_dim, hypernet, **kwargs)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
An implementation of the affine coupling layer of RealNVP (Dinh et al., 2017) that conditions on an additional context variable and uses the bijective transform,
\(\mathbf{y}_{1:d} = \mathbf{x}_{1:d}\) \(\mathbf{y}_{(d+1):D} = \mu + \sigma\odot\mathbf{x}_{(d+1):D}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, e.g. \(\mathbf{x}_{1:d}\) represents the first \(d\) elements of the inputs, and \(\mu,\sigma\) are shift and translation parameters calculated as the output of a function input \(\mathbf{x}_{1:d}\) and a context variable \(\mathbf{z}\in\mathbb{R}^M\).
That is, the first \(d\) components remain unchanged, and the subsequent \(D-d\) are shifted and translated by a function of the previous components.
Together with
ConditionalTransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn import ConditionalDenseNN >>> input_dim = 10 >>> split_dim = 6 >>> context_dim = 4 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim-split_dim, input_dim-split_dim] >>> hypernet = ConditionalDenseNN(split_dim, context_dim, [10*input_dim], ... param_dims) >>> transform = ConditionalAffineCoupling(split_dim, hypernet) >>> pyro.module("my_transform", transform) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
The inverse of the Bijector is required when, e.g., scoring the log density of a sample with
ConditionalTransformedDistribution
. This implementation caches the inverse of the Bijector when its forward operation is called, e.g., when sampling fromConditionalTransformedDistribution
. However, if the cached value isn’t available, either because it was overwritten during sampling a new value or an arbitary value is being scored, it will calculate it manually.This is an operation that scales as O(1), i.e. constant in the input dimension. So in general, it is cheap to sample and score (an arbitrary value) from
ConditionalAffineCoupling
.- Parameters
split_dim (int) – Zero-indexed dimension \(d\) upon which to perform input/ output split for transformation.
hypernet (callable) – A neural network whose forward call returns a real-valued mean and logit-scale as a tuple. The input should have final dimension split_dim and the output final dimension input_dim-split_dim for each member of the tuple. The network also inputs a context variable as a keyword argument in order to condition the output upon it.
log_scale_min_clip (float) – The minimum value for clipping the log(scale) from the NN
log_scale_max_clip (float) – The maximum value for clipping the log(scale) from the NN
References:
Laurent Dinh, Jascha Sohl-Dickstein, and Samy Bengio. Density estimation using Real NVP. ICLR 2017.
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 1)¶
ConditionalGeneralizedChannelPermute¶
- class ConditionalGeneralizedChannelPermute(nn, channels=3, permutation=None)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
A bijection that generalizes a permutation on the channels of a batch of 2D image in \([\ldots,C,H,W]\) format conditioning on an additional context variable. Specifically this transform performs the operation,
\(\mathbf{y} = \text{torch.nn.functional.conv2d}(\mathbf{x}, W)\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and \(W\sim C\times C\times 1\times 1\) is the filter matrix for a 1x1 convolution with \(C\) input and output channels.
Ignoring the final two dimensions, \(W\) is restricted to be the matrix product,
\(W = PLU\)
where \(P\sim C\times C\) is a permutation matrix on the channel dimensions, and \(LU\sim C\times C\) is an invertible product of a lower triangular and an upper triangular matrix that is the output of an NN with input \(z\in\mathbb{R}^{M}\) representing the context variable to condition on.
The input \(\mathbf{x}\) and output \(\mathbf{y}\) both have shape […,C,H,W], where C is the number of channels set at initialization.
This operation was introduced in [1] for Glow normalizing flow, and is also known as 1x1 invertible convolution. It appears in other notable work such as [2,3], and corresponds to the class tfp.bijectors.MatvecLU of TensorFlow Probability.
Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> context_dim = 5 >>> batch_size = 3 >>> channels = 3 >>> base_dist = dist.Normal(torch.zeros(channels, 32, 32), ... torch.ones(channels, 32, 32)) >>> hidden_dims = [context_dim*10, context_dim*10] >>> nn = DenseNN(context_dim, hidden_dims, param_dims=[channels*channels]) >>> transform = ConditionalGeneralizedChannelPermute(nn, channels=channels) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
- Parameters
nn – a function inputting the context variable and outputting real-valued parameters of dimension \(C^2\).
channels (int) – Number of channel dimensions in the input.
[1] Diederik P. Kingma, Prafulla Dhariwal. Glow: Generative Flow with Invertible 1x1 Convolutions. [arXiv:1807.03039]
[2] Ryan Prenger, Rafael Valle, Bryan Catanzaro. WaveGlow: A Flow-based Generative Network for Speech Synthesis. [arXiv:1811.00002]
[3] Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. [arXiv:1906.04032]
- bijective = True¶
- codomain = IndependentConstraint(Real(), 3)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 3)¶
ConditionalHouseholder¶
- class ConditionalHouseholder(input_dim, nn, count_transforms=1)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
Represents multiple applications of the Householder bijective transformation conditioning on an additional context. A single Householder transformation takes the form,
\(\mathbf{y} = (I - 2*\frac{\mathbf{u}\mathbf{u}^T}{||\mathbf{u}||^2})\mathbf{x}\)
where \(\mathbf{x}\) are the inputs with dimension \(D\), \(\mathbf{y}\) are the outputs, and \(\mathbf{u}\in\mathbb{R}^D\) is the output of a function, e.g. a NN, with input \(z\in\mathbb{R}^{M}\) representing the context variable to condition on.
The transformation represents the reflection of \(\mathbf{x}\) through the plane passing through the origin with normal \(\mathbf{u}\).
\(D\) applications of this transformation are able to transform standard i.i.d. standard Gaussian noise into a Gaussian variable with an arbitrary covariance matrix. With \(K<D\) transformations, one is able to approximate a full-rank Gaussian distribution using a linear transformation of rank \(K\).
Together with
ConditionalTransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim] >>> hypernet = DenseNN(context_dim, [50, 50], param_dims) >>> transform = ConditionalHouseholder(input_dim, hypernet) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
- Parameters
References:
[1] Jakub M. Tomczak, Max Welling. Improving Variational Auto-Encoders using Householder Flow. [arXiv:1611.09630]
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 1)¶
ConditionalMatrixExponential¶
- class ConditionalMatrixExponential(input_dim, nn, iterations=8, normalization='none', bound=None)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
A dense matrix exponential bijective transform (Hoogeboom et al., 2020) that conditions on an additional context variable with equation,
\(\mathbf{y} = \exp(M)\mathbf{x}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, \(\exp(\cdot)\) represents the matrix exponential, and \(M\in\mathbb{R}^D\times\mathbb{R}^D\) is the output of a neural network conditioning on a context variable \(\mathbf{z}\) for input dimension \(D\). In general, \(M\) is not required to be invertible.
Due to the favourable mathematical properties of the matrix exponential, the transform has an exact inverse and a log-determinate-Jacobian that scales in time-complexity as \(O(D)\). Both the forward and reverse operations are approximated with a truncated power series. For numerical stability, the norm of \(M\) can be restricted with the normalization keyword argument.
Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim*input_dim] >>> hypernet = DenseNN(context_dim, [50, 50], param_dims) >>> transform = ConditionalMatrixExponential(input_dim, hypernet) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
- Parameters
input_dim (int) – the dimension of the input (and output) variable.
iterations (int) – the number of terms to use in the truncated power series that approximates matrix exponentiation.
normalization (string) – One of [‘none’, ‘weight’, ‘spectral’] normalization that selects what type of normalization to apply to the weight matrix. weight corresponds to weight normalization (Salimans and Kingma, 2016) and spectral to spectral normalization (Miyato et al, 2018).
bound (float) – a bound on either the weight or spectral norm, when either of those two types of regularization are chosen by the normalization argument. A lower value for this results in fewer required terms of the truncated power series to closely approximate the exact value of the matrix exponential.
References:
- [1] Emiel Hoogeboom, Victor Garcia Satorras, Jakub M. Tomczak, Max Welling. The
Convolution Exponential and Generalized Sylvester Flows. [arXiv:2006.01910]
- [2] Tim Salimans, Diederik P. Kingma. Weight Normalization: A Simple
Reparameterization to Accelerate Training of Deep Neural Networks. [arXiv:1602.07868]
- [3] Takeru Miyato, Toshiki Kataoka, Masanori Koyama, Yuichi Yoshida. Spectral
Normalization for Generative Adversarial Networks. ICLR 2018.
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 1)¶
ConditionalNeuralAutoregressive¶
- class ConditionalNeuralAutoregressive(autoregressive_nn, **kwargs)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
An implementation of the deep Neural Autoregressive Flow (NAF) bijective transform of the “IAF flavour” conditioning on an additiona context variable that can be used for sampling and scoring samples drawn from it (but not arbitrary ones).
Example usage:
>>> from pyro.nn import ConditionalAutoRegressiveNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> arn = ConditionalAutoRegressiveNN(input_dim, context_dim, [40], ... param_dims=[16]*3) >>> transform = ConditionalNeuralAutoregressive(arn, hidden_units=16) >>> pyro.module("my_transform", transform) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
The inverse operation is not implemented. This would require numerical inversion, e.g., using a root finding method - a possibility for a future implementation.
- Parameters
autoregressive_nn (nn.Module) – an autoregressive neural network whose forward call returns a tuple of three real-valued tensors, whose last dimension is the input dimension, and whose penultimate dimension is equal to hidden_units.
hidden_units (int) – the number of hidden units to use in the NAF transformation (see Eq (8) in reference)
activation (string) – Activation function to use. One of ‘ELU’, ‘LeakyReLU’, ‘sigmoid’, or ‘tanh’.
Reference:
[1] Chin-Wei Huang, David Krueger, Alexandre Lacoste, Aaron Courville. Neural Autoregressive Flows. [arXiv:1804.00779]
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
Conditions on a context variable, returning a non-conditional transform of of type
NeuralAutoregressive
.
- domain = IndependentConstraint(Real(), 1)¶
ConditionalPlanar¶
- class ConditionalPlanar(nn)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
A conditional ‘planar’ bijective transform using the equation,
\(\mathbf{y} = \mathbf{x} + \mathbf{u}\tanh(\mathbf{w}^T\mathbf{z}+b)\)
where \(\mathbf{x}\) are the inputs with dimension \(D\), \(\mathbf{y}\) are the outputs, and the pseudo-parameters \(b\in\mathbb{R}\), \(\mathbf{u}\in\mathbb{R}^D\), and \(\mathbf{w}\in\mathbb{R}^D\) are the output of a function, e.g. a NN, with input \(z\in\mathbb{R}^{M}\) representing the context variable to condition on. For this to be an invertible transformation, the condition \(\mathbf{w}^T\mathbf{u}>-1\) is enforced.
Together with
ConditionalTransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [1, input_dim, input_dim] >>> hypernet = DenseNN(context_dim, [50, 50], param_dims) >>> transform = ConditionalPlanar(hypernet) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
The inverse of this transform does not possess an analytical solution and is left unimplemented. However, the inverse is cached when the forward operation is called during sampling, and so samples drawn using the planar transform can be scored.
- Parameters
nn (callable) – a function inputting the context variable and outputting a triplet of real-valued parameters of dimensions \((1, D, D)\).
References: [1] Variational Inference with Normalizing Flows [arXiv:1505.05770] Danilo Jimenez Rezende, Shakir Mohamed
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 1)¶
ConditionalRadial¶
- class ConditionalRadial(nn)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
A conditional ‘radial’ bijective transform context using the equation,
\(\mathbf{y} = \mathbf{x} + \beta h(\alpha,r)(\mathbf{x} - \mathbf{x}_0)\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and \(\alpha\in\mathbb{R}^+\), \(\beta\in\mathbb{R}\), and \(\mathbf{x}_0\in\mathbb{R}^D\), are the output of a function, e.g. a NN, with input \(z\in\mathbb{R}^{M}\) representing the context variable to condition on. The input dimension is \(D\), \(r=||\mathbf{x}-\mathbf{x}_0||_2\), and \(h(\alpha,r)=1/(\alpha+r)\). For this to be an invertible transformation, the condition \(\beta>-\alpha\) is enforced.
Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim, 1, 1] >>> hypernet = DenseNN(context_dim, [50, 50], param_dims) >>> transform = ConditionalRadial(hypernet) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
The inverse of this transform does not possess an analytical solution and is left unimplemented. However, the inverse is cached when the forward operation is called during sampling, and so samples drawn using the radial transform can be scored.
- Parameters
input_dim (int) – the dimension of the input (and output) variable.
References:
[1] Danilo Jimenez Rezende, Shakir Mohamed. Variational Inference with Normalizing Flows. [arXiv:1505.05770]
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = IndependentConstraint(Real(), 1)¶
ConditionalSpline¶
- class ConditionalSpline(nn, input_dim, count_bins, bound=3.0, order='linear')[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
An implementation of the element-wise rational spline bijections of linear and quadratic order (Durkan et al., 2019; Dolatabadi et al., 2020) conditioning on an additional context variable.
Rational splines are functions that are comprised of segments that are the ratio of two polynomials. For instance, for the \(d\)-th dimension and the \(k\)-th segment on the spline, the function will take the form,
\(y_d = \frac{\alpha^{(k)}(x_d)}{\beta^{(k)}(x_d)},\)
where \(\alpha^{(k)}\) and \(\beta^{(k)}\) are two polynomials of order \(d\) whose parameters are the output of a function, e.g. a NN, with input \(z\\in\\mathbb{R}^{M}\) representing the context variable to condition on.. For \(d=1\), we say that the spline is linear, and for \(d=2\), quadratic. The spline is constructed on the specified bounding box, \([-K,K]\times[-K,K]\), with the identity function used elsewhere.
Rational splines offer an excellent combination of functional flexibility whilst maintaining a numerically stable inverse that is of the same computational and space complexities as the forward operation. This element-wise transform permits the accurate represention of complex univariate distributions.
Example usage:
>>> from pyro.nn.dense_nn import DenseNN >>> input_dim = 10 >>> context_dim = 5 >>> batch_size = 3 >>> count_bins = 8 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [input_dim * count_bins, input_dim * count_bins, ... input_dim * (count_bins - 1), input_dim * count_bins] >>> hypernet = DenseNN(context_dim, [50, 50], param_dims) >>> transform = ConditionalSpline(hypernet, input_dim, count_bins) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
- Parameters
input_dim (int) – Dimension of the input vector. This is required so we know how many parameters to store.
count_bins (int) – The number of segments comprising the spline.
bound (float) – The quantity \(K\) determining the bounding box, \([-K,K]\times[-K,K]\), of the spline.
order (string) – One of [‘linear’, ‘quadratic’] specifying the order of the spline.
References:
Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. NeurIPS 2019.
Hadi M. Dolatabadi, Sarah Erfani, Christopher Leckie. Invertible Generative Modeling using Linear Rational Splines. AISTATS 2020.
- bijective = True¶
- codomain = Real()¶
- condition(context)[source]¶
See
pyro.distributions.conditional.ConditionalTransformModule.condition()
- domain = Real()¶
ConditionalSplineAutoregressive¶
- class ConditionalSplineAutoregressive(input_dim, autoregressive_nn, **kwargs)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransformModule
An implementation of the autoregressive layer with rational spline bijections of linear and quadratic order (Durkan et al., 2019; Dolatabadi et al., 2020) that conditions on an additional context variable. Rational splines are functions that are comprised of segments that are the ratio of two polynomials (see
Spline
).The autoregressive layer uses the transformation,
\(y_d = g_{\theta_d}(x_d)\ \ \ d=1,2,\ldots,D\)
where \(\mathbf{x}=(x_1,x_2,\ldots,x_D)\) are the inputs, \(\mathbf{y}=(y_1,y_2,\ldots,y_D)\) are the outputs, \(g_{\theta_d}\) is an elementwise rational monotonic spline with parameters \(\theta_d\), and \(\theta=(\theta_1,\theta_2,\ldots,\theta_D)\) is the output of a conditional autoregressive NN inputting \(\mathbf{x}\) and conditioning on the context variable \(\mathbf{z}\).
Example usage:
>>> from pyro.nn import ConditionalAutoRegressiveNN >>> input_dim = 10 >>> count_bins = 8 >>> context_dim = 5 >>> batch_size = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> hidden_dims = [input_dim * 10, input_dim * 10] >>> param_dims = [count_bins, count_bins, count_bins - 1, count_bins] >>> hypernet = ConditionalAutoRegressiveNN(input_dim, context_dim, hidden_dims, ... param_dims=param_dims) >>> transform = ConditionalSplineAutoregressive(input_dim, hypernet, ... count_bins=count_bins) >>> pyro.module("my_transform", transform) >>> z = torch.rand(batch_size, context_dim) >>> flow_dist = dist.ConditionalTransformedDistribution(base_dist, ... [transform]).condition(z) >>> flow_dist.sample(sample_shape=torch.Size([batch_size]))
- Parameters
input_dim (int) – Dimension of the input vector. Despite operating element-wise, this is required so we know how many parameters to store.
autoregressive_nn (callable) – an autoregressive neural network whose forward call returns tuple of the spline parameters
count_bins (int) – The number of segments comprising the spline.
bound (float) – The quantity \(K\) determining the bounding box, \([-K,K]\times[-K,K]\), of the spline.
order (string) – One of [‘linear’, ‘quadratic’] specifying the order of the spline.
References:
Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. NeurIPS 2019.
Hadi M. Dolatabadi, Sarah Erfani, Christopher Leckie. Invertible Generative Modeling using Linear Rational Splines. AISTATS 2020.
- bijective = True¶
- codomain = IndependentConstraint(Real(), 1)¶
- condition(context)[source]¶
Conditions on a context variable, returning a non-conditional transform of of type
SplineAutoregressive
.
- domain = IndependentConstraint(Real(), 1)¶
ConditionalTransformModule¶
- class ConditionalTransformModule(*args, **kwargs)[source]¶
Bases:
pyro.distributions.conditional.ConditionalTransform
,torch.nn.modules.module.Module
Conditional transforms with learnable parameters such as normalizing flows should inherit from this class rather than
ConditionalTransform
so they are also a subclass ofModule
and inherit all the useful methods of that class.
GeneralizedChannelPermute¶
- class GeneralizedChannelPermute(channels=3, permutation=None)[source]¶
Bases:
pyro.distributions.transforms.generalized_channel_permute.ConditionedGeneralizedChannelPermute
,pyro.distributions.torch_transform.TransformModule
A bijection that generalizes a permutation on the channels of a batch of 2D image in \([\ldots,C,H,W]\) format. Specifically this transform performs the operation,
\(\mathbf{y} = \text{torch.nn.functional.conv2d}(\mathbf{x}, W)\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and \(W\sim C\times C\times 1\times 1\) is the filter matrix for a 1x1 convolution with \(C\) input and output channels.
Ignoring the final two dimensions, \(W\) is restricted to be the matrix product,
\(W = PLU\)
where \(P\sim C\times C\) is a permutation matrix on the channel dimensions, \(L\sim C\times C\) is a lower triangular matrix with ones on the diagonal, and \(U\sim C\times C\) is an upper triangular matrix. \(W\) is initialized to a random orthogonal matrix. Then, \(P\) is fixed and the learnable parameters set to \(L,U\).
The input \(\mathbf{x}\) and output \(\mathbf{y}\) both have shape […,C,H,W], where C is the number of channels set at initialization.
This operation was introduced in [1] for Glow normalizing flow, and is also known as 1x1 invertible convolution. It appears in other notable work such as [2,3], and corresponds to the class tfp.bijectors.MatvecLU of TensorFlow Probability.
Example usage:
>>> channels = 3 >>> base_dist = dist.Normal(torch.zeros(channels, 32, 32), ... torch.ones(channels, 32, 32)) >>> inv_conv = GeneralizedChannelPermute(channels=channels) >>> flow_dist = dist.TransformedDistribution(base_dist, [inv_conv]) >>> flow_dist.sample()
- Parameters
channels (int) – Number of channel dimensions in the input.
[1] Diederik P. Kingma, Prafulla Dhariwal. Glow: Generative Flow with Invertible 1x1 Convolutions. [arXiv:1807.03039]
[2] Ryan Prenger, Rafael Valle, Bryan Catanzaro. WaveGlow: A Flow-based Generative Network for Speech Synthesis. [arXiv:1811.00002]
[3] Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. [arXiv:1906.04032]
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 3)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 3)¶
Householder¶
- class Householder(input_dim, count_transforms=1)[source]¶
Bases:
pyro.distributions.transforms.householder.ConditionedHouseholder
,pyro.distributions.torch_transform.TransformModule
Represents multiple applications of the Householder bijective transformation. A single Householder transformation takes the form,
\(\mathbf{y} = (I - 2*\frac{\mathbf{u}\mathbf{u}^T}{||\mathbf{u}||^2})\mathbf{x}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and the learnable parameters are \(\mathbf{u}\in\mathbb{R}^D\) for input dimension \(D\).
The transformation represents the reflection of \(\mathbf{x}\) through the plane passing through the origin with normal \(\mathbf{u}\).
\(D\) applications of this transformation are able to transform standard i.i.d. standard Gaussian noise into a Gaussian variable with an arbitrary covariance matrix. With \(K<D\) transformations, one is able to approximate a full-rank Gaussian distribution using a linear transformation of rank \(K\).
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = Householder(10, count_transforms=5) >>> pyro.module("my_transform", p) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
- Parameters
References:
[1] Jakub M. Tomczak, Max Welling. Improving Variational Auto-Encoders using Householder Flow. [arXiv:1611.09630]
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- volume_preserving = True¶
MatrixExponential¶
- class MatrixExponential(input_dim, iterations=8, normalization='none', bound=None)[source]¶
Bases:
pyro.distributions.transforms.matrix_exponential.ConditionedMatrixExponential
,pyro.distributions.torch_transform.TransformModule
A dense matrix exponential bijective transform (Hoogeboom et al., 2020) with equation,
\(\mathbf{y} = \exp(M)\mathbf{x}\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, \(\exp(\cdot)\) represents the matrix exponential, and the learnable parameters are \(M\in\mathbb{R}^D\times\mathbb{R}^D\) for input dimension \(D\). In general, \(M\) is not required to be invertible.
Due to the favourable mathematical properties of the matrix exponential, the transform has an exact inverse and a log-determinate-Jacobian that scales in time-complexity as \(O(D)\). Both the forward and reverse operations are approximated with a truncated power series. For numerical stability, the norm of \(M\) can be restricted with the normalization keyword argument.
Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = MatrixExponential(10) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
- Parameters
input_dim (int) – the dimension of the input (and output) variable.
iterations (int) – the number of terms to use in the truncated power series that approximates matrix exponentiation.
normalization (string) – One of [‘none’, ‘weight’, ‘spectral’] normalization that selects what type of normalization to apply to the weight matrix. weight corresponds to weight normalization (Salimans and Kingma, 2016) and spectral to spectral normalization (Miyato et al, 2018).
bound (float) – a bound on either the weight or spectral norm, when either of those two types of regularization are chosen by the normalization argument. A lower value for this results in fewer required terms of the truncated power series to closely approximate the exact value of the matrix exponential.
References:
- [1] Emiel Hoogeboom, Victor Garcia Satorras, Jakub M. Tomczak, Max Welling. The
Convolution Exponential and Generalized Sylvester Flows. [arXiv:2006.01910]
- [2] Tim Salimans, Diederik P. Kingma. Weight Normalization: A Simple
Reparameterization to Accelerate Training of Deep Neural Networks. [arXiv:1602.07868]
- [3] Takeru Miyato, Toshiki Kataoka, Masanori Koyama, Yuichi Yoshida. Spectral
Normalization for Generative Adversarial Networks. ICLR 2018.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
NeuralAutoregressive¶
- class NeuralAutoregressive(autoregressive_nn, hidden_units=16, activation='sigmoid')[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of the deep Neural Autoregressive Flow (NAF) bijective transform of the “IAF flavour” that can be used for sampling and scoring samples drawn from it (but not arbitrary ones).
Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> arn = AutoRegressiveNN(10, [40], param_dims=[16]*3) >>> transform = NeuralAutoregressive(arn, hidden_units=16) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse operation is not implemented. This would require numerical inversion, e.g., using a root finding method - a possibility for a future implementation.
- Parameters
autoregressive_nn (nn.Module) – an autoregressive neural network whose forward call returns a tuple of three real-valued tensors, whose last dimension is the input dimension, and whose penultimate dimension is equal to hidden_units.
hidden_units (int) – the number of hidden units to use in the NAF transformation (see Eq (8) in reference)
activation (string) – Activation function to use. One of ‘ELU’, ‘LeakyReLU’, ‘sigmoid’, or ‘tanh’.
Reference:
[1] Chin-Wei Huang, David Krueger, Alexandre Lacoste, Aaron Courville. Neural Autoregressive Flows. [arXiv:1804.00779]
- autoregressive = True¶
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- eps = 1e-08¶
Planar¶
- class Planar(input_dim)[source]¶
Bases:
pyro.distributions.transforms.planar.ConditionedPlanar
,pyro.distributions.torch_transform.TransformModule
A ‘planar’ bijective transform with equation,
\(\mathbf{y} = \mathbf{x} + \mathbf{u}\tanh(\mathbf{w}^T\mathbf{z}+b)\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and the learnable parameters are \(b\in\mathbb{R}\), \(\mathbf{u}\in\mathbb{R}^D\), \(\mathbf{w}\in\mathbb{R}^D\) for input dimension \(D\). For this to be an invertible transformation, the condition \(\mathbf{w}^T\mathbf{u}>-1\) is enforced.
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = Planar(10) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse of this transform does not possess an analytical solution and is left unimplemented. However, the inverse is cached when the forward operation is called during sampling, and so samples drawn using the planar transform can be scored.
- Parameters
input_dim (int) – the dimension of the input (and output) variable.
References:
[1] Danilo Jimenez Rezende, Shakir Mohamed. Variational Inference with Normalizing Flows. [arXiv:1505.05770]
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
Polynomial¶
- class Polynomial(autoregressive_nn, input_dim, count_degree, count_sum)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An autoregressive bijective transform as described in Jaini et al. (2019) applying following equation element-wise,
\(y_n = c_n + \int^{x_n}_0\sum^K_{k=1}\left(\sum^R_{r=0}a^{(n)}_{r,k}u^r\right)du\)
where \(x_n\) is the \(n\) is the \(n\), \(\left\{a^{(n)}_{r,k}\in\mathbb{R}\right\}\) are learnable parameters that are the output of an autoregressive NN inputting \(x_{\prec n}={x_1,x_2,\ldots,x_{n-1}}\).
Together with
TransformedDistribution
this provides a way to create richer variational approximations.Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> input_dim = 10 >>> count_degree = 4 >>> count_sum = 3 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [(count_degree + 1)*count_sum] >>> arn = AutoRegressiveNN(input_dim, [input_dim*10], param_dims) >>> transform = Polynomial(arn, input_dim=input_dim, count_degree=count_degree, ... count_sum=count_sum) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse of this transform does not possess an analytical solution and is left unimplemented. However, the inverse is cached when the forward operation is called during sampling, and so samples drawn using a polynomial transform can be scored.
- Parameters
autoregressive_nn (nn.Module) – an autoregressive neural network whose forward call returns a tensor of real-valued numbers of size (batch_size, (count_degree+1)*count_sum, input_dim)
count_degree (int) – The degree of the polynomial to use for each element-wise transformation.
count_sum (int) – The number of polynomials to sum in each element-wise transformation.
References:
[1] Priyank Jaini, Kira A. Shelby, Yaoliang Yu. Sum-of-squares polynomial flow. [arXiv:1905.02325]
- autoregressive = True¶
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
Radial¶
- class Radial(input_dim)[source]¶
Bases:
pyro.distributions.transforms.radial.ConditionedRadial
,pyro.distributions.torch_transform.TransformModule
A ‘radial’ bijective transform using the equation,
\(\mathbf{y} = \mathbf{x} + \beta h(\alpha,r)(\mathbf{x} - \mathbf{x}_0)\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, and the learnable parameters are \(\alpha\in\mathbb{R}^+\), \(\beta\in\mathbb{R}\), \(\mathbf{x}_0\in\mathbb{R}^D\), for input dimension \(D\), \(r=||\mathbf{x}-\mathbf{x}_0||_2\), \(h(\alpha,r)=1/(\alpha+r)\). For this to be an invertible transformation, the condition \(\beta>-\alpha\) is enforced.
Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = Radial(10) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
The inverse of this transform does not possess an analytical solution and is left unimplemented. However, the inverse is cached when the forward operation is called during sampling, and so samples drawn using the radial transform can be scored.
- Parameters
input_dim (int) – the dimension of the input (and output) variable.
References:
[1] Danilo Jimenez Rezende, Shakir Mohamed. Variational Inference with Normalizing Flows. [arXiv:1505.05770]
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
Spline¶
- class Spline(input_dim, count_bins=8, bound=3.0, order='linear')[source]¶
Bases:
pyro.distributions.transforms.spline.ConditionedSpline
,pyro.distributions.torch_transform.TransformModule
An implementation of the element-wise rational spline bijections of linear and quadratic order (Durkan et al., 2019; Dolatabadi et al., 2020). Rational splines are functions that are comprised of segments that are the ratio of two polynomials. For instance, for the \(d\)-th dimension and the \(k\)-th segment on the spline, the function will take the form,
\(y_d = \frac{\alpha^{(k)}(x_d)}{\beta^{(k)}(x_d)},\)
where \(\alpha^{(k)}\) and \(\beta^{(k)}\) are two polynomials of order \(d\). For \(d=1\), we say that the spline is linear, and for \(d=2\), quadratic. The spline is constructed on the specified bounding box, \([-K,K]\times[-K,K]\), with the identity function used elsewhere.
Rational splines offer an excellent combination of functional flexibility whilst maintaining a numerically stable inverse that is of the same computational and space complexities as the forward operation. This element-wise transform permits the accurate represention of complex univariate distributions.
Example usage:
>>> base_dist = dist.Normal(torch.zeros(10), torch.ones(10)) >>> transform = Spline(10, count_bins=4, bound=3.) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
- Parameters
input_dim (int) – Dimension of the input vector. This is required so we know how many parameters to store.
count_bins (int) – The number of segments comprising the spline.
bound (float) – The quantity \(K\) determining the bounding box, \([-K,K]\times[-K,K]\), of the spline.
order (string) – One of [‘linear’, ‘quadratic’] specifying the order of the spline.
References:
Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. NeurIPS 2019.
Hadi M. Dolatabadi, Sarah Erfani, Christopher Leckie. Invertible Generative Modeling using Linear Rational Splines. AISTATS 2020.
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = Real()¶
- domain: torch.distributions.constraints.Constraint = Real()¶
SplineAutoregressive¶
- class SplineAutoregressive(input_dim, autoregressive_nn, count_bins=8, bound=3.0, order='linear')[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of the autoregressive layer with rational spline bijections of linear and quadratic order (Durkan et al., 2019; Dolatabadi et al., 2020). Rational splines are functions that are comprised of segments that are the ratio of two polynomials (see
Spline
).The autoregressive layer uses the transformation,
\(y_d = g_{\theta_d}(x_d)\ \ \ d=1,2,\ldots,D\)
where \(\mathbf{x}=(x_1,x_2,\ldots,x_D)\) are the inputs, \(\mathbf{y}=(y_1,y_2,\ldots,y_D)\) are the outputs, \(g_{\theta_d}\) is an elementwise rational monotonic spline with parameters \(\theta_d\), and \(\theta=(\theta_1,\theta_2,\ldots,\theta_D)\) is the output of an autoregressive NN inputting \(\mathbf{x}\).
Example usage:
>>> from pyro.nn import AutoRegressiveNN >>> input_dim = 10 >>> count_bins = 8 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> hidden_dims = [input_dim * 10, input_dim * 10] >>> param_dims = [count_bins, count_bins, count_bins - 1, count_bins] >>> hypernet = AutoRegressiveNN(input_dim, hidden_dims, param_dims=param_dims) >>> transform = SplineAutoregressive(input_dim, hypernet, count_bins=count_bins) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
- Parameters
input_dim (int) – Dimension of the input vector. Despite operating element-wise, this is required so we know how many parameters to store.
autoregressive_nn (callable) – an autoregressive neural network whose forward call returns tuple of the spline parameters
count_bins (int) – The number of segments comprising the spline.
bound (float) – The quantity \(K\) determining the bounding box, \([-K,K]\times[-K,K]\), of the spline.
order (string) – One of [‘linear’, ‘quadratic’] specifying the order of the spline.
References:
Conor Durkan, Artur Bekasov, Iain Murray, George Papamakarios. Neural Spline Flows. NeurIPS 2019.
Hadi M. Dolatabadi, Sarah Erfani, Christopher Leckie. Invertible Generative Modeling using Linear Rational Splines. AISTATS 2020.
- autoregressive = True¶
- bijective = True¶
- codomain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
- domain: torch.distributions.constraints.Constraint = IndependentConstraint(Real(), 1)¶
SplineCoupling¶
- class SplineCoupling(input_dim, split_dim, hypernet, count_bins=8, bound=3.0, order='linear', identity=False)[source]¶
Bases:
pyro.distributions.torch_transform.TransformModule
An implementation of the coupling layer with rational spline bijections of linear and quadratic order (Durkan et al., 2019; Dolatabadi et al., 2020). Rational splines are functions that are comprised of segments that are the ratio of two polynomials (see
Spline
).The spline coupling layer uses the transformation,
\(\mathbf{y}_{1:d} = g_\theta(\mathbf{x}_{1:d})\) \(\mathbf{y}_{(d+1):D} = h_\phi(\mathbf{x}_{(d+1):D};\mathbf{x}_{1:d})\)
where \(\mathbf{x}\) are the inputs, \(\mathbf{y}\) are the outputs, e.g. \(\mathbf{x}_{1:d}\) represents the first \(d\) elements of the inputs, \(g_\theta\) is either the identity function or an elementwise rational monotonic spline with parameters \(\theta\), and \(h_\phi\) is a conditional elementwise spline spline, conditioning on the first \(d\) elements.
Example usage:
>>> from pyro.nn import DenseNN >>> input_dim = 10 >>> split_dim = 6 >>> count_bins = 8 >>> base_dist = dist.Normal(torch.zeros(input_dim), torch.ones(input_dim)) >>> param_dims = [(input_dim - split_dim) * count_bins, ... (input_dim - split_dim) * count_bins, ... (input_dim - split_dim) * (count_bins - 1), ... (input_dim - split_dim) * count_bins] >>> hypernet = DenseNN(split_dim, [10*input_dim], param_dims) >>> transform = SplineCoupling(input_dim, split_dim, hypernet) >>> pyro.module("my_transform", transform) >>> flow_dist = dist.TransformedDistribution(base_dist, [transform]) >>> flow_dist.sample()
- Parameters